Home » Eclipse Projects » Buckminster dev » [buckminster-dev] Fwd: Build XText with ant
|
| Re: [buckminster-dev] Fwd: Build XText with ant [message #1697411 is a reply to message #1697408] |
Wed, 03 June 2015 17:10   |
 Ed Willink
Messages: 7655
Registered: July 2009 |
Senior Member |
|
|
Hi
line 20: 'JavaSE-1.8' is not a valid Execution Environment
You are not using Java 8, either because it is not available, not
configured or your version of Buckminster does not support it.
Regards
Ed Willink
On 03/06/2015 18:01, sivanarayana ganesh wrote:
>
> Hi,
>
> I have been struggling to build my XText project with buckminister
> generated build file(build.ant). This is what I have done.
> Env : Eclipse Luna, Java 1.8
>
> --> Create new Xtext project, and created some grammar
> ---> Ran mwe workflows and xtext artifacts
> --> Create buckminister project
> ---> ant -f build.ant
>
> Errors:
>
> [java] Error: file
> /home/vagrant/workspace/com.visa.ovn.rules.ui/src-gen/com/visa/ovn/ui/contentassist/antlr/PartialRulesContentAssistParser.java,
> line 33: Syntax error, parameterized types are only available if
> source level is 1.5 or greater
> [java] Warning: file
> /home/vagrant/workspace/com.visa.ovn.rules.ui/META-INF/MANIFEST.MF,
> line 20: 'JavaSE-1.8' is not a valid Execution Environment
>
> Sorry if it is a basic question. Appreciate any help.
>
> Thanks.
>
> -Siva.
>
>
>
>
|
|
|
| Re: [buckminster-dev] Fwd: Build XText with ant [message #1697414 is a reply to message #1697411] |
Wed, 03 June 2015 17:30 |
Siva Gaddam
Messages: 22
Registered: June 2015 |
Junior Member |
|
|
<div dir="ltr"><div><div>Hi Ed,<br><br></div>Not sure what wrong with my setup . Here is my configuration.<br><br></div><div>IDE: Eclipse LUNA 4.4.2<br><br></div><div><b>Buckminister:</b><br><br>org.eclipse.buckminster.ant (1.2.360.v20130317-0829) "Buckminster Ant Plug-in" [Starting]<br>org.eclipse.buckminster.cmdline (1.0.350.v20130717-0925) "Buckminster Headless Launcher" [Starting]<br>org.eclipse.buckminster.core (1.3.0.v20131003-1606) "Buckminster Core" [Starting]<br>org.eclipse.buckminster.download (1.1.0.v20130614-0838) "Buckminster download cache" [Starting]<br>org.eclipse.buckminster.executor (1.0.0.v20130317-0829) "Buckminster Executor Plug-in" [Starting]<br>org.eclipse.buckminster.fetcher (1.0.0.v20130317-0829) "Buckminster Fetcher Plug-in" [Starting]<br>org.eclipse.buckminster.generic (1.0.0.v20130317-0829) "Buckminster Generic Plug-in" [Resolved]<br>org.eclipse.buckminster.jarprocessor (1.0.0.v20130317-0829) "Buckminster Jarprocessor" [Resolved]<br>org.eclipse.buckminster.jdt (1.1.0.v20130317-0829) "Buckminster JDT Plug-in" [Starting]<br>org.eclipse.buckminster.junit (1.0.0.v20130317-0829) "Buckminster JUnit Integration" [Resolved]<br>org.eclipse.buckminster.osgi.filter (1.1.0.v20130317-0829) "Buckminster OSGi Filter" [Resolved]<br>org.eclipse.buckminster.pde (1.3.0.v20140311-2235) "Buckminster PDE Plug-in" [Starting]<br>org.eclipse.buckminster..runtime (1.3.0.v20130317-0829) "Buckminster Runtime Plug-in" [Starting]<br>org.eclipse.buckminster.sax (1.0.0.v20130317-0829) "Buckminster SAX Parser utilities" [Resolved]<br><br></div><div><b>Buckminister headless:</b><br> Buckminster - Core Headless 1.6.0.v20131003-1606 org.eclipse.buckminster.core.headless.feature.feature.group Eclipse Buckminster Project<br> Buckminster - Headless PDE support 1.6.0.v20140311-2235 org.eclipse.buckminster.pde.headless.feature.feature.group Eclipse Buckminster Project<br><br></div><div><b>Java:</b><br></div><div><br>[vagrant@ovn-local-dev-new-rhel-66 buckminster]$ java -version<br>java version "1.8.0_45"<br>Java(TM) SE Runtime Environment (build 1.8.0_45-b14)<br>Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)<br>[vagrant@ovn-local-dev-new-rhel-66 buckminster]$ <br><br></div><div><b>Javac:</b><br>[vagrant@ovn-local-dev-new-rhel-66 buckminster]$ javac -version<br>javac 1.8.0_45<br>[vagrant@ovn-local-dev-new-rhel-66 buckminster]$ <br><br></div><div><b>JAVA_HOME:</b><br></div><div> is set to java8.<br><br></div><div>Not sure what's wrong with my setup. Any clues?<br><br></div><div>-Siva.<br></div><div><br></div><div><br><br></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jun 3, 2015 at 5:10 PM, Ed Willink <span dir="ltr"><<a href="mailto:ed@xxxxxxxx.uk" target="_blank">ed@xxxxxxxx.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hi<span class=""><br>
<br>
line 20: 'JavaSE-1.8' is not a valid Execution Environment<br>
<br></span>
You are not using Java 8, either because it is not available, not configured or your version of Buckminster does not support it.<br>
<br>
Regards<br>
<br>
Ed Willink<div><div class="h5"><br>
<br>
<br>
On 03/06/2015 18:01, sivanarayana ganesh wrote:<br>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<br>
Hi,<br>
<br>
I have been struggling to build my XText project with buckminister generated build file(build.ant). This is what I have done.<br>
Env : Eclipse Luna, Java 1.8<br>
<br>
--> Create new Xtext project, and created some grammar<br>
---> Ran mwe workflows and xtext artifacts<br>
--> Create buckminister project<br>
---> ant -f build.ant<br>
<br>
Errors:<br>
<br>
[java] Error: file /home/vagrant/workspace/com.visa.ovn.rules.ui/src-gen/com/visa/ovn/ui/contentassist/antlr/PartialRulesContentAssistParser.java, line 33: Syntax error, parameterized types are only available if source level is 1.5 or greater<br>
[java] Warning: file /home/vagrant/workspace/com.visa.ovn.rules.ui/META-INF/MANIFEST.MF, line 20: 'JavaSE-1.8' is not a valid Execution Environment<br>
<br>
Sorry if it is a basic question. Appreciate any help.<br>
<br>
Thanks.<br>
<br>
-Siva.<br>
<br>
<br>
<br>
<br>
</blockquote>
<br></div></div>
_______________________________________________<br>
buckminster-dev mailing list<br>
<a href="mailto:buckminster-dev@xxxxxxxx" target="_blank">buckminster-dev@xxxxxxxx</a><span class=""><br>
To change your delivery options, retrieve your password, or unsubscribe from this list, visit<br>
</span><a href="https://dev.eclipse.org/mailman/listinfo/buckminster-dev" target="_blank">https://dev.eclipse.org/mailman/listinfo/buckminster-dev</a><br>
</blockquote></div><br></div></div>
|
|
|
| Re: [buckminster-dev] Fwd: Build XText with ant [message #1697424 is a reply to message #1697414] |
Wed, 03 June 2015 20:04 |
Ed Willink
Messages: 7655
Registered: July 2009 |
Senior Member |
|
|
HI
Doesn't look like a Luna version of Buckminster. I would expect some
201405/6's.
You have at least your Eclipse configuration/installed JREs and launch
configuration to worry about.
Regards
Ed Wiillink
On 03/06/2015 18:30, sivanarayana ganesh wrote:
> Hi Ed,
>
> Not sure what wrong with my setup . Here is my configuration.
>
> IDE: Eclipse LUNA 4.4.2
>
> *Buckminister:*
>
> org.eclipse.buckminster.ant (1.2.360.v20130317-0829) "Buckminster Ant
> Plug-in" [Starting]
> org.eclipse.buckminster.cmdline (1.0.350.v20130717-0925) "Buckminster
> Headless Launcher" [Starting]
> org.eclipse.buckminster.core (1.3.0.v20131003-1606) "Buckminster Core"
> [Starting]
> org.eclipse.buckminster.download (1.1.0.v20130614-0838) "Buckminster
> download cache" [Starting]
> org.eclipse.buckminster.executor (1.0.0.v20130317-0829) "Buckminster
> Executor Plug-in" [Starting]
> org.eclipse.buckminster.fetcher (1.0.0.v20130317-0829) "Buckminster
> Fetcher Plug-in" [Starting]
> org.eclipse.buckminster.generic (1.0.0.v20130317-0829) "Buckminster
> Generic Plug-in" [Resolved]
> org.eclipse.buckminster.jarprocessor (1.0.0.v20130317-0829)
> "Buckminster Jarprocessor" [Resolved]
> org.eclipse.buckminster.jdt (1.1.0.v20130317-0829) "Buckminster JDT
> Plug-in" [Starting]
> org.eclipse.buckminster.junit (1.0.0.v20130317-0829) "Buckminster
> JUnit Integration" [Resolved]
> org.eclipse.buckminster.osgi.filter (1.1.0.v20130317-0829)
> "Buckminster OSGi Filter" [Resolved]
> org.eclipse.buckminster.pde (1.3.0.v20140311-2235) "Buckminster PDE
> Plug-in" [Starting]
> org.eclipse.buckminster.runtime (1.3.0.v20130317-0829) "Buckminster
> Runtime Plug-in" [Starting]
> org.eclipse.buckminster.sax (1.0.0.v20130317-0829) "Buckminster SAX
> Parser utilities" [Resolved]
>
> *Buckminister headless:*
> Buckminster - Core Headless 1.6.0.v20131003-1606
> org.eclipse.buckminster.core.headless.feature.feature.group Eclipse
> Buckminster Project
> Buckminster - Headless PDE support 1.6.0.v20140311-2235
> org.eclipse.buckminster.pde.headless.feature.feature.group Eclipse
> Buckminster Project
>
> *Java:*
>
> [vagrant@ovn-local-dev-new-rhel-66 buckminster]$ java -version
> java version "1.8.0_45"
> Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
> Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
> [vagrant@ovn-local-dev-new-rhel-66 buckminster]$
>
> *Javac:*
> [vagrant@ovn-local-dev-new-rhel-66 buckminster]$ javac -version
> javac 1.8.0_45
> [vagrant@ovn-local-dev-new-rhel-66 buckminster]$
>
> *JAVA_HOME:*
> is set to java8.
>
> Not sure what's wrong with my setup. Any clues?
>
> -Siva.
>
>
>
>
> On Wed, Jun 3, 2015 at 5:10 PM, Ed Willink <ed@xxxxxxxx.uk
> <mailto:ed@xxxxxxxx.uk>> wrote:
>
> Hi
>
> line 20: 'JavaSE-1.8' is not a valid Execution Environment
>
> You are not using Java 8, either because it is not available, not
> configured or your version of Buckminster does not support it.
>
> Regards
>
> Ed Willink
>
>
>
> On 03/06/2015 18:01, sivanarayana ganesh wrote:
>
>
> Hi,
>
> I have been struggling to build my XText project with
> buckminister generated build file(build.ant). This is what I
> have done.
> Env : Eclipse Luna, Java 1.8
>
> --> Create new Xtext project, and created some grammar
> ---> Ran mwe workflows and xtext artifacts
> --> Create buckminister project
> ---> ant -f build.ant
>
> Errors:
>
> [java] Error: file
> /home/vagrant/workspace/com.visa.ovn.rules.ui/src-gen/com/visa/ovn/ui/contentassist/antlr/PartialRulesContentAssistParser.java,
> line 33: Syntax error, parameterized types are only available
> if source level is 1.5 or greater
> [java] Warning: file
> /home/vagrant/workspace/com.visa.ovn.rules.ui/META-INF/MANIFEST.MF,
> line 20: 'JavaSE-1.8' is not a valid Execution Environment
>
> Sorry if it is a basic question. Appreciate any help.
>
> Thanks.
>
> -Siva.
>
>
>
>
>
> _______________________________________________
> buckminster-dev mailing list
> buckminster-dev@xxxxxxxx <mailto:buckminster-dev@xxxxxxxx>
> To change your delivery options, retrieve your password, or
> unsubscribe from this list, visit
> https://dev.eclipse.org/mailman/listinfo/buckminster-dev
>
>
|
|
|
Goto Forum:
Current Time: Tue Apr 23 15:52:05 GMT 2024
Powered by FUDForum. Page generated in 0.03764 seconds |
] 
Search
Help
Register
Login
Home
