Eclipse Community Forums: Newcomers » Error creating session

Home » Newcomers » Newcomers » Error creating session(eclipse, openocd and codesourcery toolchain issue.)

Error creating session [message #1400357]

Mon, 14 July 2014 00:52

Eclipse User

Trying to connect to a stm32f3 discovery board. I have installed openocd, GDB Hardware Debugger and the codesourery toolchain. When I try to start the GDB Hardware Debugging debugger I get the error:

Error creating session
Cannot run program "/home/dev/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/arm-none-eabi": error=13, Permission denied
Cannot run program "/home/dev/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/arm-none-eabi": error=13, Permission denied
Cannot run program "/home/dev/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/arm-none-eabi": error=13, Permission denied

I have tried to make the permissions accessible but with no luck. I may have done it wrong. Also it displays the message 3 times just like shown above. I dont know if that is of any significance. Anyways any suggestions are welcome.

[Updated on: Mon, 14 July 2014 22:59] by Moderator

Previous Topic:	Error at launch
Next Topic:	Problem to unzip the SDK with winRar

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jul 20 14:00:51 EDT 2025

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter