Eclipse Community Forums: Mylyn » Using Mylyn with sourceforge trackers

Home » Eclipse Projects » Mylyn » Using Mylyn with sourceforge trackers

Using Mylyn with sourceforge trackers [message #21757]

Mon, 13 August 2007 17:07

Eclipse User

Greetings all,

Has anyone successfully gotten Mylyn to work with Sourceforge trackers via the
generic Web connecter? I have followed the FAQ available on Eclipsepedia, but
was unable to even get the basic task query to work, much to be able to create
new tasks on the sourceforge server.

Any help appreciated... TKA!

Erik Norvelle
TextCite Project
http://sourceforge.net/projects/textcite

Re: Using Mylyn with sourceforge trackers [message #23864 is a reply to message #21757]

Mon, 27 August 2007 01:38

Eclipse User

Originally posted by: beatmik.acm.org

Erik,

If you haven't yet looked at the following entry you should do so:

http://wiki.eclipse.org/Using_Sourceforge_with_Mylyn

If you have already looked at that, first try to see if you can get it
to work with the template without modifying the template, then modify
the template adding your projects' parameters.

Mik

Erik Norvelle wrote:
> Greetings all,
>
> Has anyone successfully gotten Mylyn to work with Sourceforge trackers via the
> generic Web connecter? I have followed the FAQ available on Eclipsepedia, but
> was unable to even get the basic task query to work, much to be able to create
> new tasks on the sourceforge server.
>
> Any help appreciated... TKA!
>
> Erik Norvelle
> TextCite Project
> http://sourceforge.net/projects/textcite

Re: Using Mylyn with sourceforge trackers [message #69452 is a reply to message #23864]

Mon, 15 June 2009 09:08

Eclipse User

Hi Mik,

I've configured SF according to the Wiki but have the issue that only
the first bug is retrieved

group_id: 88349
atid: 586362

url:
${serverUrl}/tracker2/?group_id=${group_id}&atid=${atid} &set=custom&_status=1

pattern: <a
href=" /tracker/\?func=detail&aid=(.+?)&group_id=${group_id }&atid=${atid} ">(.+?)</a>

Doesn't seem to matter if tracker or tracker2. I'm suspecting this might
be an issue with the mylyn regexp?

I'm running Mylyn Connector: Web Templates (Advanced)
3.2.0.I20090614-2300-e3x org.eclipse.mylyn.web.tasks_feature.feature.group

Best regards,
Andreas

On 27.08.2007 07:38, Mik Kersten wrote:
> Erik,
>
> If you haven't yet looked at the following entry you should do so:
>
> http://wiki.eclipse.org/Using_Sourceforge_with_Mylyn
>
> If you have already looked at that, first try to see if you can get it
> to work with the template without modifying the template, then modify
> the template adding your projects' parameters.
>
> Mik
>
> Erik Norvelle wrote:
>> Greetings all,
>>
>> Has anyone successfully gotten Mylyn to work with Sourceforge trackers
>> via the generic Web connecter? I have followed the FAQ available on
>> Eclipsepedia, but was unable to even get the basic task query to work,
>> much to be able to create new tasks on the sourceforge server.
>>
>> Any help appreciated... TKA!
>>
>> Erik Norvelle
>> TextCite Project
>> http://sourceforge.net/projects/textcite

Re: Using Mylyn with sourceforge trackers [message #69470 is a reply to message #69452]

Tue, 16 June 2009 11:46

Eclipse User

Originally posted by: dcarver.starstandard.org

Actually, if I were you I would consider migrating to one of the other
Hosted App solutions that Sourceforge now offers. You can then use the
Trac, or Mylyn-Mantis connectors to connect.

Sourceforge is going to be removing the current Tracker feature soon
anyways.

Dave

Andreas Goetz wrote:
> Hi Mik,
>
> I've configured SF according to the Wiki but have the issue that only
> the first bug is retrieved
>
> group_id: 88349
> atid: 586362
>
> url:
> ${serverUrl}/tracker2/?group_id=${group_id}&atid=${atid} &set=custom&_status=1
>
>
> pattern: <a
> href=" /tracker/\?func=detail&aid=(.+?)&group_id=${group_id }&atid=${atid} ">(.+?)</a>
>
>
> Doesn't seem to matter if tracker or tracker2. I'm suspecting this might
> be an issue with the mylyn regexp?
>
> I'm running Mylyn Connector: Web Templates (Advanced)
> 3.2.0.I20090614-2300-e3x
> org.eclipse.mylyn.web.tasks_feature.feature.group
>
> Best regards,
> Andreas
>
>
> On 27.08.2007 07:38, Mik Kersten wrote:
>> Erik,
>>
>> If you haven't yet looked at the following entry you should do so:
>>
>> http://wiki.eclipse.org/Using_Sourceforge_with_Mylyn
>>
>> If you have already looked at that, first try to see if you can get it
>> to work with the template without modifying the template, then modify
>> the template adding your projects' parameters.
>>
>> Mik
>>
>> Erik Norvelle wrote:
>>> Greetings all,
>>>
>>> Has anyone successfully gotten Mylyn to work with Sourceforge trackers
>>> via the generic Web connecter? I have followed the FAQ available on
>>> Eclipsepedia, but was unable to even get the basic task query to work,
>>> much to be able to create new tasks on the sourceforge server.
>>>
>>> Any help appreciated... TKA!
>>>
>>> Erik Norvelle
>>> TextCite Project
>>> http://sourceforge.net/projects/textcite
>

Re: Using Mylyn with sourceforge trackers [message #69687 is a reply to message #69470]

Mon, 22 June 2009 05:37

Eclipse User

Hi David,

as far as I know this is not an option for open source/ free of charge
services yet.

Anyway- I believe I'm seing a problem with the web based connector, or
rather cannot get it working with SF.

Any idea where I could poke into?

Best regards,
Andreas

On 16.06.2009 17:46, David Carver wrote:
> Actually, if I were you I would consider migrating to one of the other
> Hosted App solutions that Sourceforge now offers. You can then use the
> Trac, or Mylyn-Mantis connectors to connect.
>
> Sourceforge is going to be removing the current Tracker feature soon
> anyways.
>
> Dave
>
> Andreas Goetz wrote:
>> Hi Mik,
>>
>> I've configured SF according to the Wiki but have the issue that only
>> the first bug is retrieved
>>
>> group_id: 88349
>> atid: 586362
>>
>> url:
>> ${serverUrl}/tracker2/?group_id=${group_id}&atid=${atid} &set=custom&_status=1
>>
>>
>> pattern: <a
>> href=" /tracker/\?func=detail&aid=(.+?)&group_id=${group_id }&atid=${atid} ">(.+?)</a>
>>
>>
>> Doesn't seem to matter if tracker or tracker2. I'm suspecting this
>> might be an issue with the mylyn regexp?
>>
>> I'm running Mylyn Connector: Web Templates (Advanced)
>> 3.2.0.I20090614-2300-e3x
>> org.eclipse.mylyn.web.tasks_feature.feature.group
>>
>> Best regards,
>> Andreas
>>
>>
>> On 27.08.2007 07:38, Mik Kersten wrote:
>>> Erik,
>>>
>>> If you haven't yet looked at the following entry you should do so:
>>>
>>> http://wiki.eclipse.org/Using_Sourceforge_with_Mylyn
>>>
>>> If you have already looked at that, first try to see if you can get it
>>> to work with the template without modifying the template, then modify
>>> the template adding your projects' parameters.
>>>
>>> Mik
>>>
>>> Erik Norvelle wrote:
>>>> Greetings all,
>>>>
>>>> Has anyone successfully gotten Mylyn to work with Sourceforge trackers
>>>> via the generic Web connecter? I have followed the FAQ available on
>>>> Eclipsepedia, but was unable to even get the basic task query to work,
>>>> much to be able to create new tasks on the sourceforge server.
>>>>
>>>> Any help appreciated... TKA!
>>>>
>>>> Erik Norvelle
>>>> TextCite Project
>>>> http://sourceforge.net/projects/textcite
>>

Re: Using Mylyn with sourceforge trackers [message #69707 is a reply to message #69687]

Mon, 22 June 2009 18:36

Eclipse User

Andreas,

The web connector is just a simple regexp-based screen scrapper, so it
is sensitive to the web page changes, but then regexps can be easily
adjusted to the new page. You can open "advanced settings" on query
configuration dialog and use Open action to see a downloaded web page in
a web browser where you can also see its source html and then adjust
regexp accordingly.

regards,
Eugene

Andreas Goetz wrote:
> Hi David,
>
> as far as I know this is not an option for open source/ free of charge
> services yet.
>
> Anyway- I believe I'm seing a problem with the web based connector, or
> rather cannot get it working with SF.
>
> Any idea where I could poke into?
>
> Best regards,
> Andreas
>
>
> On 16.06.2009 17:46, David Carver wrote:
>> Actually, if I were you I would consider migrating to one of the other
>> Hosted App solutions that Sourceforge now offers. You can then use the
>> Trac, or Mylyn-Mantis connectors to connect.
>>
>> Sourceforge is going to be removing the current Tracker feature soon
>> anyways.
>>
>> Dave
>>
>> Andreas Goetz wrote:
>>> Hi Mik,
>>>
>>> I've configured SF according to the Wiki but have the issue that only
>>> the first bug is retrieved
>>>
>>> group_id: 88349
>>> atid: 586362
>>>
>>> url:
>>> ${serverUrl}/tracker2/?group_id=${group_id}&atid=${atid} &set=custom&_status=1
>>>
>>>
>>>
>>> pattern: <a
>>> href=" /tracker/\?func=detail&aid=(.+?)&group_id=${group_id }&atid=${atid} ">(.+?)</a>
>>>
>>>
>>>
>>> Doesn't seem to matter if tracker or tracker2. I'm suspecting this
>>> might be an issue with the mylyn regexp?
>>>
>>> I'm running Mylyn Connector: Web Templates (Advanced)
>>> 3.2.0.I20090614-2300-e3x
>>> org.eclipse.mylyn.web.tasks_feature.feature.group
>>>
>>> Best regards,
>>> Andreas
>>>
>>>
>>> On 27.08.2007 07:38, Mik Kersten wrote:
>>>> Erik,
>>>>
>>>> If you haven't yet looked at the following entry you should do so:
>>>>
>>>> http://wiki.eclipse.org/Using_Sourceforge_with_Mylyn
>>>>
>>>> If you have already looked at that, first try to see if you can get it
>>>> to work with the template without modifying the template, then modify
>>>> the template adding your projects' parameters.
>>>>
>>>> Mik
>>>>
>>>> Erik Norvelle wrote:
>>>>> Greetings all,
>>>>>
>>>>> Has anyone successfully gotten Mylyn to work with Sourceforge
>>>>> trackers
>>>>> via the generic Web connecter? I have followed the FAQ available on
>>>>> Eclipsepedia, but was unable to even get the basic task query to
>>>>> work,
>>>>> much to be able to create new tasks on the sourceforge server.
>>>>>
>>>>> Any help appreciated... TKA!
>>>>>
>>>>> Erik Norvelle
>>>>> TextCite Project
>>>>> http://sourceforge.net/projects/textcite
>>>
>

Re: Using Mylyn with sourceforge trackers [message #70072 is a reply to message #69707]

Wed, 01 July 2009 03:31

Eclipse User

Found the problem- regexp contained a trailing space that was not obvious...

Best regards,
Andreas

On 23.06.2009 00:36, Eugene Kuleshov wrote:
> Andreas,
>
> The web connector is just a simple regexp-based screen scrapper, so it
> is sensitive to the web page changes, but then regexps can be easily
> adjusted to the new page. You can open "advanced settings" on query
> configuration dialog and use Open action to see a downloaded web page in
> a web browser where you can also see its source html and then adjust
> regexp accordingly.
>
> regards,
> Eugene
>

Re: Using Mylyn with sourceforge trackers [message #578350 is a reply to message #21757]

Mon, 27 August 2007 01:38

Eclipse User

Erik,

If you haven't yet looked at the following entry you should do so:

http://wiki.eclipse.org/Using_Sourceforge_with_Mylyn

If you have already looked at that, first try to see if you can get it
to work with the template without modifying the template, then modify
the template adding your projects' parameters.

Mik

Erik Norvelle wrote:
> Greetings all,
>
> Has anyone successfully gotten Mylyn to work with Sourceforge trackers via the
> generic Web connecter? I have followed the FAQ available on Eclipsepedia, but
> was unable to even get the basic task query to work, much to be able to create
> new tasks on the sourceforge server.
>
> Any help appreciated... TKA!
>
> Erik Norvelle
> TextCite Project
> http://sourceforge.net/projects/textcite

Re: Using Mylyn with sourceforge trackers [message #597810 is a reply to message #23864]

Mon, 15 June 2009 09:08

Eclipse User