Home » Eclipse Projects » Technology Project and PMC » CVS Setup error ....
| |
| Re: CVS Setup error .... [message #18341 is a reply to message #18324] |
Sat, 24 August 2002 17:40   |
 Robert Upshall
Messages: 6
Registered: July 2009 |
Junior Member |
|
|
Hi,
Sorry about posting here, it seemed like the best place out of all the
eclipse.org newsgroups.
I am using a local pserver connection to a mapped network drive.
If I put the CVSROOT at C:\cvs, it works fine with eclipse .. ie. I know my
pserver is working for my local machine. So cvs and eclipse are both
working,
But if I use h:\cvsroot, h: is my network drive, cvs does work from a
command line, ie. I can set my cvs root and do a cvs init and it
initializes, I can checkout and commit from the command line fine. So cvsnt
allows me to work fine, I have all the authority I need.
Why does eclipse care that it is a mapped drive? Shouldn't it only matter
that pserver it setup correctly and that I have access to the repository?
Robert
"Stein M. Eliassen" <dulci@start.no> wrote in message
news:ak6cc9$dsv$1@rogue.oti.com...
> Robert Upshall wrote:
> > Hi,
> >
> > I am trying to setup a CVS location in Eclipse 2.0.
> >
> > I am attempting to setup a CVS location on a network drive. The
> drive is a
> > mapped drive in Windows 2000 to the IFS on an AS400.
> >
> > From a command line it works fine, but when I try to use the Eclipse
> > integration it gives me an error that I don't have authority to
> CVS/config.
> >
> > I do have access and authority and it works from the command line but
> from
> > inside Eclipse is doesn't.
> >
> > Any ideas?
> >
>
> First off, eclipse.tools is the correct newsgroup for these types of
> questions. The the ng-names are a bit confusing, but hopefully something
> is done about it:
>
> http://bugs.eclipse.org/bugs/show_bug.cgi?id=19399
>
>
> Anyways, a mapped drive you say?
>
> That means you are trying to use 'local' connection-type wich are not
> supported by Eclipse, dunno if it's going be in the future either.
>
> Eclipse support pserver, ext and extssh for cvs connection-types.
>
> Can you connect to cvs on AS400 with any of these connection-types?
>
> Stein
>
|
|
|
| Re: CVS Setup error .... [message #18375 is a reply to message #18341] |
Mon, 26 August 2002 14:23 |
Eclipse User |
|
|
|
Originally posted by: Michael_Valenta.oti.com
Robert,
Yes, Eclipse shouldn't care about where CVSNT puts it's repositories.
However, the Eclipse CVS client works a bit differently then the cvs
command line client. This will often expose bugs in CVSNT that do not
surface when used with the command line client. Please enter a bug
report in bugzilla to track this issue. Please include the error message
that occurs and anything that appears in the .metadata/.log file in your
workspace directory.
Michael
Robert Upshall wrote:
> Hi,
>
> Sorry about posting here, it seemed like the best place out of all the
> eclipse.org newsgroups.
>
> I am using a local pserver connection to a mapped network drive.
>
> If I put the CVSROOT at C:\cvs, it works fine with eclipse .. ie. I know my
> pserver is working for my local machine. So cvs and eclipse are both
> working,
>
> But if I use h:\cvsroot, h: is my network drive, cvs does work from a
> command line, ie. I can set my cvs root and do a cvs init and it
> initializes, I can checkout and commit from the command line fine. So cvsnt
> allows me to work fine, I have all the authority I need.
>
> Why does eclipse care that it is a mapped drive? Shouldn't it only matter
> that pserver it setup correctly and that I have access to the repository?
>
> Robert
>
>
> "Stein M. Eliassen" <dulci@start.no> wrote in message
> news:ak6cc9$dsv$1@rogue.oti.com...
>
>>Robert Upshall wrote:
>> > Hi,
>> >
>> > I am trying to setup a CVS location in Eclipse 2.0.
>> >
>> > I am attempting to setup a CVS location on a network drive. The
>>drive is a
>> > mapped drive in Windows 2000 to the IFS on an AS400.
>> >
>> > From a command line it works fine, but when I try to use the Eclipse
>> > integration it gives me an error that I don't have authority to
>>CVS/config.
>> >
>> > I do have access and authority and it works from the command line but
>>from
>> > inside Eclipse is doesn't.
>> >
>> > Any ideas?
>> >
>>
>>First off, eclipse.tools is the correct newsgroup for these types of
>>questions. The the ng-names are a bit confusing, but hopefully something
>>is done about it:
>>
>>http://bugs.eclipse.org/bugs/show_bug.cgi?id=19399
>>
>>
>>Anyways, a mapped drive you say?
>>
>>That means you are trying to use 'local' connection-type wich are not
>>supported by Eclipse, dunno if it's going be in the future either.
>>
>>Eclipse support pserver, ext and extssh for cvs connection-types.
>>
>>Can you connect to cvs on AS400 with any of these connection-types?
>>
>>Stein
>>
>>
>
>
|
|
| |
| Re: CVS Setup error .... [message #573597 is a reply to message #18324] |
Sat, 24 August 2002 17:40 |
Robert Upshall
Messages: 6
Registered: July 2009 |
Junior Member |
|
|
Hi,
Sorry about posting here, it seemed like the best place out of all the
eclipse.org newsgroups.
I am using a local pserver connection to a mapped network drive.
If I put the CVSROOT at C:\cvs, it works fine with eclipse .. ie. I know my
pserver is working for my local machine. So cvs and eclipse are both
working,
But if I use h:\cvsroot, h: is my network drive, cvs does work from a
command line, ie. I can set my cvs root and do a cvs init and it
initializes, I can checkout and commit from the command line fine. So cvsnt
allows me to work fine, I have all the authority I need.
Why does eclipse care that it is a mapped drive? Shouldn't it only matter
that pserver it setup correctly and that I have access to the repository?
Robert
"Stein M. Eliassen" <dulci@start.no> wrote in message
news:ak6cc9$dsv$1@rogue.oti.com...
> Robert Upshall wrote:
> > Hi,
> >
> > I am trying to setup a CVS location in Eclipse 2.0.
> >
> > I am attempting to setup a CVS location on a network drive. The
> drive is a
> > mapped drive in Windows 2000 to the IFS on an AS400.
> >
> > From a command line it works fine, but when I try to use the Eclipse
> > integration it gives me an error that I don't have authority to
> CVS/config.
> >
> > I do have access and authority and it works from the command line but
> from
> > inside Eclipse is doesn't.
> >
> > Any ideas?
> >
>
> First off, eclipse.tools is the correct newsgroup for these types of
> questions. The the ng-names are a bit confusing, but hopefully something
> is done about it:
>
> http://bugs.eclipse.org/bugs/show_bug.cgi?id=19399
>
>
> Anyways, a mapped drive you say?
>
> That means you are trying to use 'local' connection-type wich are not
> supported by Eclipse, dunno if it's going be in the future either.
>
> Eclipse support pserver, ext and extssh for cvs connection-types.
>
> Can you connect to cvs on AS400 with any of these connection-types?
>
> Stein
>
|
|
|
| Re: CVS Setup error .... [message #573685 is a reply to message #18341] |
Mon, 26 August 2002 14:23 |
Michael Valenta
Messages: 560
Registered: July 2009 |
Senior Member |
|
|
Robert,
Yes, Eclipse shouldn't care about where CVSNT puts it's repositories.
However, the Eclipse CVS client works a bit differently then the cvs
command line client. This will often expose bugs in CVSNT that do not
surface when used with the command line client. Please enter a bug
report in bugzilla to track this issue. Please include the error message
that occurs and anything that appears in the .metadata/.log file in your
workspace directory.
Michael
Robert Upshall wrote:
> Hi,
>
> Sorry about posting here, it seemed like the best place out of all the
> eclipse.org newsgroups.
>
> I am using a local pserver connection to a mapped network drive.
>
> If I put the CVSROOT at C:\cvs, it works fine with eclipse .. ie. I know my
> pserver is working for my local machine. So cvs and eclipse are both
> working,
>
> But if I use h:\cvsroot, h: is my network drive, cvs does work from a
> command line, ie. I can set my cvs root and do a cvs init and it
> initializes, I can checkout and commit from the command line fine. So cvsnt
> allows me to work fine, I have all the authority I need.
>
> Why does eclipse care that it is a mapped drive? Shouldn't it only matter
> that pserver it setup correctly and that I have access to the repository?
>
> Robert
>
>
> "Stein M. Eliassen" <dulci@start.no> wrote in message
> news:ak6cc9$dsv$1@rogue.oti.com...
>
>>Robert Upshall wrote:
>> > Hi,
>> >
>> > I am trying to setup a CVS location in Eclipse 2.0.
>> >
>> > I am attempting to setup a CVS location on a network drive. The
>>drive is a
>> > mapped drive in Windows 2000 to the IFS on an AS400.
>> >
>> > From a command line it works fine, but when I try to use the Eclipse
>> > integration it gives me an error that I don't have authority to
>>CVS/config.
>> >
>> > I do have access and authority and it works from the command line but
>>from
>> > inside Eclipse is doesn't.
>> >
>> > Any ideas?
>> >
>>
>>First off, eclipse.tools is the correct newsgroup for these types of
>>questions. The the ng-names are a bit confusing, but hopefully something
>>is done about it:
>>
>>http://bugs.eclipse.org/bugs/show_bug.cgi?id=19399
>>
>>
>>Anyways, a mapped drive you say?
>>
>>That means you are trying to use 'local' connection-type wich are not
>>supported by Eclipse, dunno if it's going be in the future either.
>>
>>Eclipse support pserver, ext and extssh for cvs connection-types.
>>
>>Can you connect to cvs on AS400 with any of these connection-types?
>>
>>Stein
>>
>>
>
>
|
|
|
Goto Forum:
Current Time: Thu Apr 25 12:53:46 GMT 2024
Powered by FUDForum. Page generated in 0.03530 seconds |
] 
Search
Help
Register
Login
Home
