Eclipse Community Forums: OM2M » MQTT Server Authorization (request/response topic)

Help

Home

Home » Eclipse Projects » OM2M » MQTT Server Authorization (request/response topic)

Show: Today's Messages :: Show Polls :: Message Navigator

MQTT Server Authorization (request/response topic) [message #1766473]

Wed, 21 June 2017 18:49

Brahim AIT ELHAJ

Messages: 3
Registered: February 2016

Junior Member

Hello,

Maybe my question is more oneM2M spec related but i hope someone will be able to enlighten me !

Let's say i have the following configuration :
- a device (sensor) : ADN-AE
- a gateway device : MN (MN-AE + MN-CSE)
- a platform service IN (IN-CSE)

Regarding the communication :
- The MQTT server is co-located with the IN-CSE and allows connection of the MNs.
- The communication between my gateway and my platform is done through MQTT
- The communication between my ADN and the MN is not done through MQTT but another protocol (let's say ZIgbee) ... so my ADN cannot subscribe/publish to MQTT topics. (See 5.2.3.3 of the TS-0010-V2.4.1 / MQTT Protocol Binding document).

To sum-up, i'm in the exact same configuration as the figure below :

In the same document (), the spec indicates that the pattern to send request is : /oneM2M/req/<originator>/<receiver>/<type>

When the ADN wants to indicate that some data has changed, it will communicate with its MN and the MN will communicate with the IN.
My questions are :
Q1 : who are the originator and the receiver in this case (from the spec point of view) ?

if we say that the originator is the MN and the IN the receiver, how can we know (at the IN level) that the event/notification concerns the ADN because its ID is nowhere ...

The spec details about who subscribes and published to what topic seems great ... but i can't see how it suits the ADN that has no MQTT client ...

The spec gives a lot possibles scenarios for MQTT architecture (See 5.2.2 of the TS-0010-V2.4.1 / MQTT Protocol Binding document). However it would be great having some concrete examples.

Q3 : I was able to find a really interesting oneM2M technical Report document named «Smart Farm Example using MQTT Broker».
However all the implementations sections are empty.

Does some sample implementation for this kind of use case exist somewhere ? Any hint would be greatly appreciated.

Thanks in advance for your help
Best regards

Report message to a moderator

Re: MQTT Server Authorization (request/response topic) [message #1766508 is a reply to message #1766473]

Thu, 22 June 2017 11:31

Brahim AIT ELHAJ

Messages: 3
Registered: February 2016

Junior Member

Hi,

I think, i found the answer by myself. The « Functional Architecture » document spec says :

originator: in case of a request traversing a single reference point, the Originator is the AE/CSE that sends the request
NOTE: In case of a request that traverses multiple reference points, the Originator is the AE/CSE that sends the
first request in the sequence

Hence, i understand that - in my case - the originator is the ADN-AE and not the MN ... the MN only forwards the request to the IN.

The sent request by the MN MQTT Client is a MQTT Publish to :

/oneM2M/req/ADN-AE-ID/CSE-IN-ID/{type}

Am i right ?

Thanks for your help !

Report message to a moderator

Re: MQTT Server Authorization (request/response topic) [message #1775258 is a reply to message #1766508]

Fri, 27 October 2017 01:38

Umar Farooq

Messages: 11
Registered: October 2017

Junior Member

Hi Brahim,

Can you guide me on where did you learn how to to setup the communication between gateway and IN through MQTT? I understand the overall architecture, but struggle to start developing it through MQTT. Any help would be appreciated.

Thanks,
Umar

Report message to a moderator

Previous Topic:	raspberry as gateway
Next Topic:	communication between multiple IN-CSE

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Jun 06 05:33:48 GMT 2020

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter