Introduction

AspectJ contains a compiler, ajc, that can be run from Ant. Included in the aspectjtools.jar are Ant binaries to support three ways of running the compiler:

  1. AjcTask (iajc), a task to run the AspectJ post-1.1 compiler, which supports all the eclipse and ajc options, including incremental mode.

  2. Ajc11CompilerAdapter (javac), an adapter class to run the new compiler using Javac tasks by setting the build.compiler property

  3. Ajc10 (ajc), a task to run build scripts compatible with the AspectJ 1.0 tasks

This describes how to install and use the tasks and the adapter. For an example Ant script, see examples/build.xml.

Installing Ant Tasks

Install Jakarta Ant 1.5.1: Please see the official Jakarta Ant website for more information and the 1.5.1 distribution. This release is source-compatible with Ant 1.3 and Ant 1.4, but the task sources must be compiled with those versions of the Ant libraries to be used under those versions of Ant. Sources are available under the Eclipse Public License v 2.0 at https://eclipse.org/aspectj.

In Ant 1.5, third-party tasks can be declared using a taskdef entry in the build script, to identify the name and classes. When declaring a task, include the aspectjtools.jar either in the taskdef classpath or in ${ANT_HOME}/lib where it will be added to the system class path by the ant script. You may specify the task script names directly, or use the "resource" attribute to specify the default names:

<taskdef resource="org/aspectj/tools/ant/taskdefs/aspectjTaskdefs.properties"/>

The current resource file retains the name "ajc" for the Ajc10 task, and uses "iajc" for the AspectJ post-1.1 task.

In Ant 1.6, third-party tasks are declared in their own namespace using antlib.xml. For example, the following script would build and run the spacewar example, if you put the script in the examples directory and aspectjtools.jar in the ${ANT_HOME}/lib directory.

<project name="aspectj-ant1.6" default="spacewar"
    xmlns:aspectj="antlib:org.aspectj" basedir=".">
    <target name="spacewar">
        <aspectj:iajc
            argfiles="spacewar/debug.lst"
            outjar="spacewar.jar"
            classpath="../../lib/aspectjrt.jar"
       />
       <java classname="spacewar.Game"
        classpath="spacewar.jar:../../lib/aspectjrt.jar"/>
    </target>
</project>

For more information on using Ant, please refer to Jakarta’s documentation on integrating user-defined Ant tasks into builds.

AjcTask (iajc)

This task uses the AspectJ post-1.1 compiler ajc. The AspectJ compiler can be used like Javac to compile Java sources, but it can also compile AspectJ sources or weave binary aspects with Java bytecode. It can run in normal "batch" mode or in an "incremental" mode, where it only recompiles files it has to revisit. For more information on ajc, see ajc, the AspectJ compiler/weaver. Unlike Javac or the Javac Ant task, this task always compiles the specified files since aspects can apply to other (updated) files. For a workaround, see Avoiding clean compiles.

Beyond the normal ajc compiler options, this task also supports an experimental option for an incremental "tag" file, and it can copy resources from source directories or input jars to the output jar or directory.

This task is named iajc to avoid conflict with the 1.0 task ajc.

AjcTask (iajc) Options

The following tables list the supported parameters. For any parameter specified as a Path, a single path can be specified directly as an attribute, multiple paths can be specified using a nested element of the same name, and a common path can be reused by defining it as a global and passing the id to the corresponding {name}ref attribute. See Path below for more details.

Most attributes and nested elements are optional. The compiler requires that the same version of aspectjrt.jar be specified on the classpath, and that some sources be be specified (using one or more of sourceroots, injars, inpath, argfiles, and/or srcdir (with patterns)). When in incremental mode, only sourceroots may be specified.

Boolean parameters default to false unless otherwise stated.

AjcTask (iajc) options for specifying sources

Attribute Description

argfiles, argfilesRef (Path)

An argument file contains a list of arguments read by the compiler. Each line is read into one element of the argument array and may include another argfile by reference.

sourceRoots, sourceRootsRef (Path)

Directories containing source files (ending with .java or .aj) to compile.

srcdir (Path)

Base directory of sources to compile, assuming there are nested matches. This approach uses the Ant process for matching .java files and is not compatible with incremental mode. Unless using filters to limit the sources included, use sourceroots instead.

injars, injarsRef (Path)

Deprecated - use inpath instead. Read .class files for bytecode weaving from zip files (only).

inpath, inpathRef (Path)

Read .class files for bytecode weaving from directories or zip files (like classpath).

classpath, classpathRef (Path)

The classpath used by the sources being compiled. When compiling aspects, include the same version of the aspectjrt.jar.

bootclasspath, bootclasspathRef (Path)

The bootclasspath specifies types to use instead of the invoking VM’s when seeking types during compilation.

extDirs, extDirsRef (Path)

The extension directories to use instead of those in the invoking VM when seeking types during compilation.

aspectPath, aspectPathRef (Path)

Similar to classpath, aspectpath contains read-only, binary aspect libraries that are woven into sources but not included in the output. aspectpath accepts jar/zip files (but, unlike classpath, not directories).

AjcTask (iajc) options for specifying output

Attribute Description

destDir

The directory in which to place the generated class files. Only one of destDir and outJar may be set.

outJar

The zip file in which to place the generated output class files. Only one of destDir and outJar may be set.

copyInjars

(Deprecated/ignored; ajc does this.) If true, copy all non-.class files from input jar(s) to the output jar or destination directory after the compile (or incremental compile) completes. In forked mode, this copies only after the process completes, not after incremental compiles.

sourceRootCopyFilter

When set, copy all files from the sourceroot directories to the output jar or destination directory except those specified in the filter pattern. The pattern should be compatible with an Ant fileset excludes filter; when using this, most developers pass /CVS/,/.java to exclude any CVS directories or source files. See inpathDirCopyFilter. Requires destDir or outJar.

inpathDirCopyFilter

When set, copy all files from the inpath directories to the output jar or destination directory except those specified in the filter pattern. The pattern should be compatible with an Ant fileset excludes filter; when using this, most developers pass /CVS/,/.java,/.class to exclude any CVS directories, source files, or unwoven .class files. (If /.class is not specified, it will be prepended to the filter.) See sourceRootCopyFilter. (Note that ajc itself copies all resources from input jar/zip files on the inpath.) Requires destDir or outJar.

AjcTask (iajc) options for specifying compiler behavior

Attribute Description

fork

Run process in another VM. This gets the forking classpath either explicitly from a forkclasspath entry or by searching the task or system/Ant classpath for the first readable file with a name of the form aspectj{-}tools{.*}.jar. When forking you can specify the amount of memory used with maxmem. Fork cannot be used in incremental mode, unless using a tag file.

forkclasspath, forkclasspathRef (Path)

Specify the classpath to use for the compiler when forking.

maxmem

The maximum memory to use for the new VM when fork is true. Values should have the same form as accepted by the VM, e.g., "128m".

incremental

incremental mode: Build once, then recompile only required source files when user provides input. Requires that source files be specified only using sourceroots. Incompatible with forking.

tagfile

incremental mode: Build once, then recompile only required source files when the tag file is updated, finally exiting when tag file is deleted. Requires that source files be specified only using sourceroots.

X

Set experimental option(s), using comma-separated list of accepted options Options should not contain the leading X. Some commonly-used experimental options have their own entries. The other permitted ones (currently) are serializableAspects, incrementalFile, lazyTjp, reweavable, notReweavable, noInline, terminateAfterCompilation, ajruntimelevel:1.2, and ajruntimelevel:1.5. Of these, some were deprecated in AspectJ 5 (reweavable, terminateAfterCompilation, etc.).

XterminateAfterCompilation

Terminates before the weaving process, dumping out unfinished class files.

AjcTask (iajc) options for specifying compiler side-effects and messages

Attribute Description

emacssym

If true, emit .ajesym symbol files for Emacs support.

crossref

If true, emit .ajsym file into the output directory.

verbose

If true, log compiler verbose messages as Project.INFO during the compile.

logCommand

If true, log compiler command elements as Project.INFO (rather than the usual Project.VERBOSE level).

Xlistfileargs

If true, emit list of file arguments during the compile (but behaves now like verbose).

version

If true, do not compile - just print AspectJ version.

help

If true, just print help for the command-line compiler.

Xlintwarnings

Same as xlint:warning: if true, set default level of all language usage messages to warning.

Xlint

Specify default level of all language usage messages to one of [error warning ignore].

XlintFile

Specify property file containing name:level associations setting level for language messages emitted during compilation. Any levels set override the default associations in org/aspectj/weaver/XLintDefault.properties.

failonerror

If true, throw BuildException to halt build if there are any compiler errors. If false, continue notwithstanding compile errors. Defaults to true.

messageHolderClass

Specify a class to use as the message holder for the compile process. The entry must be a fully-qualified name of a class resolveable from the task classpath complying with the org.aspectj.bridge.IMessageHolder interface and having a public no-argument constructor.

showWeaveInfo

If true, emit weaver messages. Defaults to false.

AjcTask (iajc) options for specifying Eclipse compiler options

Attribute Description

nowarn

If true, same as warn:none.

deprecation

If true, same as warn:deprecation

warn

One or more comma-separated warning specifications from [constructorName packageDefaultMethod deprecation, maskedCatchBlocks unusedLocals unusedArguments, unusedImports syntheticAccess assertIdentifier].

debug

If true, same as debug:lines,vars,source

debugLevel

One or more comma-separated debug specifications from [lines vars source].

PreserveAllLocals

If true, code gen preserves all local variables (for debug purposes).

noimporterror

If true, emit no errors for unresolved imports.

referenceinfo

If true, compute reference info.

log

File to log compiler messages to.

encoding

Default source encoding format (per-file encoding not supported in Ant tasks).

proceedOnError

If true, keep compiling after errors encountered, dumping class files with problem methods.

progress

If true, emit progress (requires log).

time

If true, display speed information.

target

Specify target class file format as one of [1.1 1.2]. Defaults to 1.1 class file.

source

Set source compliance level to one of [1.3 1.4 1.5] (default is 1.4). 1.3 implies -source 1.3 and -target 1.1. 1.4 implies -source 1.4 and -target 1.2. 1.5 implies -source 1.5 and -target 1.5.

source

Set source assertion mode to one of [1.3 1.4]. Default depends on compliance mode.

AjcTask matching parameters specified as nested elements

This task forms an implicit FileSet and supports all attributes of fileset (dir becomes srcdir) as well as the nested include, exclude, and patternset elements. These can be used to specify source files. However, it is better to use sourceroots to specify source directories unless using filters to exclude some files from compilation.

AjcTask Path-like Structures

Some parameters are path-like structures containing one or more elements; these are sourceroots, argfiles, injars, inpath, classpath, bootclasspath, forkclasspath, and aspectpath. In all cases, these may be specified as nested elements, something like this:

<iajc {attributes..} />
    <{name}>
        <pathelement path="{first-location}"/>
        <pathelement path="{second-location}"/>
        ...
    <{name}>
    ...
</iajc>

As with other Path-like structures, they may be defined elsewhere and specified using the refid attribute:

<path id="aspect.path">
    <pathelement path="${home}/lib/persist.jar"/>
    <pathelement path="${home}/lib/trace.jar"/>
</path>
...
<iajc {attributes..} />
    <aspectpath refid="aspect.path"/>
    ...
</iajc>

The task also supports an attribute {name}ref for each such parameter. E.g., for aspectpath:

<iajc {attributes..} aspectpathref="aspect.path"/>

Sample of iajc task

A minimal build script defines the task and runs it, specifying the sources:

<project name="simple-example" default="compile" >
  <taskdef
      resource="org/aspectj/tools/ant/taskdefs/aspectjTaskdefs.properties">
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjtools.jar"/>
    </classpath>
  </taskdef>

  <target name="compile" >
    <iajc sourceroots="${home.dir}/ec/project/src"
        classpath="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
  </target>
</project>

Below is script with most everything in it. The compile process…​

  1. Runs in incremental mode, recompiling when the user hits return;

  2. Reads all the source files from two directories;

  3. Reads binary .class files from input jar and directory;

  4. Uses a binary aspect library for persistence;

  5. Outputs to an application jar; and

  6. Copies resources from the source directories and binary input jar and directories to the application jar.

When this target is built, the compiler will build once and then wait for input from the user. Messages are printed as usual. When the user has quit, then this runs the application.

<target name="build-test" >
  <iajc outjar="${home.dir}/output/application.jar"
          sourceRootCopyFilter="**/CVS/*,**/*.java"
          inpathDirCopyFilter="**/CVS/*,**/*.java,**/*.class"
          incremental="true" >
    <sourceroots>
      <pathelement location="${home.dir}/ec/project/src"/>
      <pathelement location="${home.dir}/ec/project/testsrc"/>
    </sourceroots>
    <inpath>
      <pathelement location="${home.dir}/build/module.jar"/>
      <pathelement location="${home.dir}/build/binary-input"/>
    </inpath>
    <aspectpath>
      <pathelement location="${home.dir}/ec/int/persist.jar"/>
    </aspectpath>
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
    </classpath>
  </iajc>

  <java classname="org.smart.app.Main">
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
      <pathelement location="${home.dir}/ec/int/persist.jar"/>
      <pathelement location="${home.dir}/output/application.jar"/>
    </classpath>
  </java>
</target>

For an example of a build script, see ../examples/build.xml.

Avoiding clean compiles

Unlike javac, the ajc compiler always processes all input because new aspects can apply to updated classes and vice-versa. However, in the case where no files have been updated, there is no reason to recompile sources. One way to implement that is with an explicit dependency check using the uptodate task:

<target name="check.aspects.jar">
  <uptodate property="build.unnecessary"
      targetfile="${aspects.module-jar}" >
     <srcfiles dir="${src1}" includes="**/*.aj"/>
     <srcfiles dir="${src2}/" includes="**/*.aj"/>
  </uptodate>
</target>

<target name="compile.aspects" depends="prepare,check.aspects.jar"
        unless="build.unnecessary">
   <iajc ...

When using this technique, be careful to verify that binary input jars are themselves up-to-date after they would have been modified by any build commands.

Programmatically handling compiler messages

Users may specify a message holder to which the compiler will pass all messages as they are generated. This will override all of the normal message printing, but does not prevent the task from failing if exceptions were thrown or if failonerror is true and the compiler detected errors in the sources.

Handling messages programmatically could be useful when using the compiler to verify code. If aspects consist of declare [error|warning], then the compiler can act to detect invariants in the code being processed. For code to compare expected and actual messages, see the AspectJ testing module (which is not included in the binary distribution).

Ajc11CompilerAdapter (javac)

This CompilerAdapter can be used in javac task calls by setting the build.compiler property. This enables users to to easily switch between the Javac and AspectJ compilers. However, because there are differences in source file handling between the Javac task and the ajc compiler, not all Javac task invocations can be turned over to iajc. However, ajc can compile anything that Javac can, so it should be possible for any given compile job to restate the Javac task in a way that can be handled by iajc/ajc.

Sample of compiler adapter

To build using the adapter, put the aspectjtools.jar on the system/ant classpath (e.g., in ${ANT_HOME}/lib) and define the build.compiler property as the fully-qualified name of the class, org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter.

The AspectJ compiler should run for any compile using the Javac task (for options, see the Ant documentation for the Javac task). For example, the call below passes all out-of-date source files in the src/org/aspectj subdirectories to the ajc command along with the destination directory:

-- command:

    cp aspectj1.1/lib/aspectjtools.jar ant/lib
    ant/bin/ant -Dbuild.compiler=org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter ...

-- task invocation in the build script:

  <javac srcdir="src" includes="org/aspectj/**/*.java" destdir="dest" />

To pass ajc-specific arguments, use a compilerarg entry.

-- command

  Ant -Dbuild.compiler=org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter

-- build script

  <property name="ajc"
              value="org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter"/>

  <javac srcdir="src" includes="org/aspectj/**/*.java" destdir="dest" >
    <compilerarg compiler="${ajc}" line="-argfile src/args.lst"/>
  <javac/>

The Javac task does special handling of source files that can interfere with ajc. It removes any files that are not out-of-date with respect to the corresponding .class files. But ajc requires all source files, since an aspect may affect a source file that is not out of date. (For a solution to this, see the build.compiler.clean property described below.) Conversely, developers sometimes specify a source directory to javac, and let it search for files for types it cannot find. AspectJ will not do this kind of searching under the source directory (since the programmer needs to control which sources are affected). (Don’t confuse the source directory used by Javac with the source root used by ajc; if you specify a source root to ajc, it will compile any source file under that source root (without exception or filtering).) To replace source dir searching in Javac, use an Ant filter to specify the source files.

Compiler adapter compilerarg options

The adapter supports any ajc command-line option passed using compilerarg, as well as the following options available only in AjcTask. Find more details on the following options in AjcTask (iajc).

  • -Xmaxmem: set maximum memory for forking (also settable in javac).

  • -Xlistfileargs: list file arguments (also settable in javac).

  • -Xfailonerror: throw BuildException on compiler error (also settable in javac).

  • -Xmessageholderclass: specify fully-qualified name of class to use as the message holder.

  • -Xcopyinjars: copy resources from any input jars to output (default behavior since 1.1.1)

  • -Xsourcerootcopyfilter {filter}: copy resources from source directories to output (minus files specified in filter)

  • -Xtagfile {file}: use file to control incremental compilation

  • -Xsrcdir {dir}: add to list of ajc source roots (all source files will be included).

Special considerations when using Javac and compilerarg:

  • The names above may differ slightly from what you might expect from AjcTask; use these forms when specifying compilerarg.

  • By default the adapter will mimic the Javac task’s copying of resource files by specifying "/CVS/,/.java,/.aj" for the sourceroot copy filter. To change this behavior, supply your own value (e.g., "/" to copy nothing).

  • Warning - define the system property build.compiler.clean to compile all files, when available. Javac prunes the source file list of "up-to-date" source files based on the timestamps of corresponding .class files, and will not compile if no sources are out of date. This is wrong for ajc which requires all the files for each compile and which may refer indirectly to sources using argument files.

    To work around this, set the global property build.compiler.clean. This tells the compiler adapter to delete all .class files in the destination directory and re-execute the javac task so javac can recalculate the list of source files. e.g.,

    Ant -Dbuild.compiler=org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter
    -Dbuild.compiler.clean=anything ...

    Caveats to consider when using this global build.compiler.clean property:

    1. If javac believes there are no out-of-date source files, then the adapter is never called and cannot clean up, and the "compile" will appear to complete successfully though it did nothing.

    2. Cleaning will makes stepwise build processes fail if they depend on the results of the prior compilation being in the same directory, since cleaning deletes all .class files.

    3. This clean process only permits one compile process at a time for each destination directory because it tracks recursion by writing a tag file to the destination directory.

    4. When running incrementally, the clean happens only before the initial compile.

Ajc10 (ajc)

This task handles the same arguments as those used by the AspectJ 1.0 task. This should permit those with existing build scripts using the Ajc Ant task to continue using the same scripts when compiling with 1.1. This will list any use of options no longer supported in 1.1 (e.g., lenient, strict, workingdir, preprocess, usejavac,…​), and does not provide access to the new features of AspectJ 1.1. (Developers using AspectJ 1.1 only should upgrade their scripts to use AjcTask instead. This will not work for AspectJ 1.2 or later.)

Ajc10 (ajc) Options

Most attributes and nested elements are optional. The compiler requires that the same version of aspectjrt.jar be specified on the classpath, and that some sources be be specified (using one or more of argfiles and srcdir (with patterns)).

Boolean parameters default to false unless otherwise stated.

Table 1. AjcTask (ajc) options for specifying sources
Attribute Description

srcdir

The base directory of the java files. See

destdir

The target directory for the output .class files

includes

Comma-separated list of patterns of files that must be included. No files are included when omitted.

includesfile

The path to a file containing include patterns.

excludes

Comma-separated list of patterns of files that must be excluded. No files (except default excludes) are excluded when omitted.

excludesfile

The path to a file containing exclude patterns.

defaultexcludes

If true, then default excludes are used. Default excludes are used when omitted (i.e., defaults to true).

classpath, classpathref

The classpath to use, optionally given as a reference to a classpath Path element defined elsewhere.

bootclasspath, bootclasspathref

The bootclasspath to use, optionally given as a reference to a bootclasspath Path element defined elsewhere.

extdirs

Paths to directories containting installed extensions.

debug

If true, emit debug info in the .class files.

deprecation

If true, emit messages about use of deprecated API.

verbose

Emit compiler status messages during the compile.

version

Emit version information and quit.

failonerror

If true, throw BuildException to halt build if there are any compiler errors. If false, continue notwithstanding compile errors. Defaults to true.

source

Value of -source option - ignored unless 1.4.
Table 2. Parameters ignored by the old ajc taskdef, but now supported or buggy
Attribute Description Supported?

encoding

Default encoding of source files.

yes

optimize

Whether source should be compiled with optimization.

yes?

target

Generate class files for specific VM version, one of [1.1 1.2].

yes

depend

Enables dependency-tracking.

no

includeAntRuntime

Whether to include the Ant run-time libraries.

no

includeJavaRuntime

Whether to include the run-time libraries from the executing VM.

no

threads

Multi-threaded compilation

no

The following table shows that many of the unique parameters in AspectJ 1.0 are no longer supported.

Table 3. Parameters unique to ajc
Attribute Description

X

deprecated X options include reweavable (on by default) reweavable:compress (compressed by default)

emacssym

Generate symbols for Emacs IDE support.

argfiles

A comma-delimited list of argfiles that contain a line-delimited list of source file paths (absolute or relative to the argfile).

argfiles - argument list files

An argument file is a file (usually {file}.lst) containing a list of source file paths (absolute or relative to the argfile). You can use it to specify all source files to be compiled, which ajc requires to avoid searching every possible source file in the source path when building aspects. If you specify an argfile to the ajc task, it will not include all files in any specified source directory (which is the default behavior for the Javac task when no includes are specified). Conversely, if you specify excludes, they will be removed from the list of files compiled even if they were specified in an argument file.

The compiler also accepts arguments that are not source files, but the IDE support for such files varies, and Javac does not support them. Be sure to include exactly one argument on each line.

Ajc10 parameters specified as nested elements

This task forms an implicit FileSet and supports all attributes of fileset (dir becomes srcdir) as well as the nested include, exclude, and patternset elements. These can be used to specify source files.

ajc's srcdir, classpath, bootclasspath, extdirs, and jvmarg attributes are path-like structures and can also be set via nested src, classpath, bootclasspath, extdirs, and jvmargs elements, respectively.

Sample of ajc task

Following is a declaration for the ajc task and a sample invocation that uses the ajc compiler to compile the files listed in default.lst into the dest dir:

<project name="example" default="compile" >
  <taskdef name="ajc"
    classname="org.aspectj.tools.ant.taskdefs.Ajc10" >
    <!-- declare classes needed to run the tasks and tools -->
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjtools.jar"/>
    </classpath>
  </taskdef>

  <target name="compile" >
    <mkdir dir="dest" />
    <ajc destdir="dest" argfiles="default.lst" >
      <!-- declare classes needed to compile the target files -->
      <classpath>
        <pathelement location="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
      </classpath>
    </ajc>
  </target>
</project>

This build script snippet

<ajc srcdir="${src}"
     destdir="${build}"
     argfiles="demo.lst"
/>

compiles all .java files specified in the demo.lst and stores the .class files in the ${build} directory. Unlike the Javac task, the includes attribute is empty by default, so only those files specified in demo.lst are included.

This next example

<ajc srcdir="${src}"
     destdir="${build}"
     includes="spacewar/*,coordination/*"
     excludes="spacewar/Debug.java"
/>

compiles .java files under the ${src} directory in the spacewar and coordination packages, and stores the .class files in the ${build} directory. All source files under spacewar/ and coordination/ are used, except Debug.java.

See ../examples/build.xml for an example build script.

Isolating problems running the Ant tasks

If you have problems with the tasks not solved by the documentation, please try to see if you have the same problems when running ajc directly on the command line.

  • If the problem occurs on the command line also, then the problem is not in the task. (It may be in the tools; please send bug reports.)

  • If the problem does not occur on the command line, then it may lie in the parameters you are supplying in Ant or in the task’s handling of them.

  • If the build script looks correct and the problem only occurs when building from Ant, then please send a report (including your build file, if possible).

Known issues with the Ant tasks

For the most up-to-date information on known problems, see the bug database for unresolved compiler bugs or taskdef bugs .

When running Ant build scripts under Eclipse 2.x variants, you will get a VerifyError because the Eclipse Ant support fails to isolate the Ant runtime properly. To run in this context, set up iajc to fork (and use forkclasspath). Eclipse 3.0 will fork Ant processes to avoid problems like this.

Memory and forking: Users email most often about the ajc task running out of memory. This is not a problem with the task; some compiles take a lot of memory, often more than similar compiles using javac.

Forking is now supported in both the Ajc11CompilerAdapter (javac) and AjcTask (iajc), and you can set the maximum memory available. You can also not fork and increase the memory available to Ant (see the Ant documentation, searching for ANT_OPTS, the variable they use in their scripts to pass VM options, e.g., ANT_OPTS=-Xmx128m).

Ant task questions and bugs

For questions, you can send email to aspectj-users@dev.eclipse.org. (Do join the list to participate!) We also welcome any bug reports, patches, and features; you can submit them to the bug database at https://bugs.eclipse.org/bugs using the AspectJ product and Ant component.