Specifying Table Editors

  1. Specifying Table Editors
    1. Introduction
    2. Edition Tables
      1. Table Tools
      2. Line Mappings
      3. Feature Column Mappings
    3. Cross Tables
      1. Table Tools
      2. Element Column Mappings
      3. Intersection Mappings


Sirius supports the definition of two kinds of tabular modelers:

Both kinds of table share a lot of elements. This document will focus on edition tables, which are the most commonly used. The section on cross-tables describes them by their differences with edition tables.

Note: Advanced features like layers, filters and mapping imports which exist for diagrams are not currently available for tables.

Edition Tables

Edition tables are configured by creating an Edition Table Description element (inside a Viewpoint) and its sub-elements (which describe the lines, columns and tools). Edition Table Descriptions are similar to other representation description elements.

The mandatory Domain Class attribute is the type of semantic element which are represented by the table. In the Model Explorer, end-users will be able to create new instances of this table on semantic elements of this type (assuming the corresponding viewpoint is enabled in the Modeling Project). The syntax for the domain class name can be the basic name, like Class, a qualified name using name of the EMF EPackage which defines the type, like uml.Class, or a fully qualified URI like http://www.eclipse.org/uml2/3.0.0/UML#//Class.

By default, new tables can be created on any instance of the Domain Class. You can use the Precondition Expression (available in the Advanced category) to change this. If such an expression is specified, it will be evaluated in the context of the semantic element the user has selected, and only if the expression returns true will the user be able to create a new table on this element.

The default title for newly created table can be specified using the Title expression ( Advanced category), which is evaluated in the context of the semantic element on which the table is created, and should return a string. If the expression is not specified, the default title is the label of the table description (of its Id if no Label is set) prefixed with the string "new " (e.g. new Package Contents).

It is recommended that the Edition Table Description be explicitly associated with the meta-model(s) of the semantic elements it will represent. You can add referenced meta-models from different sources in the Metamodels property section of the Edition Table Description. Sirius will work even without this association, but setting it explicitly will give you better feedback when validating your VSM .

The Initialization and Show on startup flags control whether table instances are created and/or opened automatically without user intervention. If Initialization is set, then when the viewpoint which contains this table description is enabled, instances of this table description will be automatically created on all compatible semantic elements. If Show on startup in set, then when a modeling project is opened which contains instances of this table description, they will be opened: if only one such representation exist, it will be opened automatically; is there are more than one, a dialog box will appear to allow the user to select which one(s) to open.

Finally, the Initial Header Column Width ( Advanced category) is specific to table descriptions (both edition tables and cross tables). It can be used to specify the default size (in pixels) of the left-most column of the table, which contains the labels of the elements represented by each line. If the value is 0 (the default), the column width will be computed from the initial content when the table is created. In case of edition tables, if the value is -1, the header Column is hidden. In case of cross tables, -1 value has the same behavior than 0 value.

Table Tools

Some tools which apply to the whole table are specified directly inside the Edition Table Description:

Tools Specification

Refer to Tools specification

Line Mappings

The lines which will appear in a table (and their organization in sub-lines) are defined by the Line mapping elements inside the Table Description element. A Table Description contains Line mappings which define which elements will appear as top-level lines of the table, while each Line mapping can contain sub-mappings which define its own direct sub-lines. If an element (the table or a line mapping) contains several sub-mappings, the element’s content will appear in the order of the mappings: first all the instances of the first mapping, then the instances of the second one, etc.

A Line mapping is defined by a Domain Class and a Semantic Candidates Expression. The Semantic Candidates Expression indicates where to look in the semantic model for elements which should be represented by the mapping. The expression is evaluated in the context of the parent’s semantic element (the parent being either the table itself or a parent line). It should return a set of semantic elements. Only those which are instances of the specified Domain Class are retained and actually represented as instances of this mapping. The semantic element thus associated to each line is called the line’s target element.

You can associate more semantic elements to a line by defining the Associated Elements Expression (in the Advanced Category), which is evaluated in the context of the target and may return more semantic elements. Any change in the target element or one of the associated elements will automatically trigger a refresh of the line.

The Header Label Expression (in the Label category) is evaluated in the context of a line’s target and should return the text to be shown for the line in the header column (on the left of the table).

A Line mapping may Reuse Sub Lines (see the Import category), including itself, as sub-mappings. The effect is exactly the same as if the reused mapping(s) were created as children if the parent. However because a mapping can reuse itself or one of its parent mapping, this allows to create table of infinite depth (or at least not bounded a priori). The Reused in Mappings property is the symmetrical of Reused Sub Lines: it shows you which line mappings reuse this one as a sub-line.

Line Style

You can create Style elements inside a line mapping to set the default style of all the cells on this line (note that this style override the column mappings one).

A Foreground Style element can be used to set the font size, font style (e.g. italic) and text color. A Background Style can be used to set the background color. Both are optional.

You can also specify Conditional styles for the foreground. Each one is a normal foreground style wrapped in a predicate expression (evaluated in the context of the line’s semantic element). If conditional styles are specified, their conditions are tested in order, and the first one which matches is used. If no conditional style is defined, the Foreground Style (or the default) is applied.

Line Tools

There are two kinds of tools which can be created inside line mappings (and apply to all instances of that mapping).

Feature Column Mappings

The columns which will appear in an edition table are defined by the Feature Column mapping elements inside the Table Description element. They are named Feature Column mappings because they normally represent a property (maybe computed) of the elements which are represented by the table’s lines, and also to distinguish them from the kind of columns which appear in cross tables.

A Feature Column mapping is defined by its Feature Name, which should normally be the name of a valid feature (attribute or reference) of the element which appear in the tables' lines. If a line represents a semantic element S1 but you want on some column to show a property of an element reachable from S1 instead of S1 itself, you can use the Feature Parent Expression ( Advanced category), which is evaluated in the context of S1 and should return an element S2. S2 will be considered the target element of the cell at this intersection instead of S1.

You can associate more semantic elements to the mapping using the Associated elements expression in the Advanced category. The expression will be evaluated in the context of the target semantic element of the cell.

The Label Expression is used to compute the text to show in each cell. It is evaluated for each cell in the context of its target semantic element. If you compute text for elements whose EClass have no common EStructuralFeatures (inherited or with same name), you can use * as Feature Name to skip the feature name validation during the cell creation.

In tables, the contents of the cell is editable by default. Even with no direct edit tool specified, Sirius will try to interpret the text entered by the user according to the type of the feature the column represents (as defined by the Feature Name. For example if a column represents a boolean attribute, Sirius will correctly interpret the strings "true" and "false" and set the value accordingly when the user edits a cell. You can disable this behavior by giving a Can Edit expression, which is evaluated in the context of the semantic element of each individual cell. It should return false if that cell should not be editable.

Finally, the Header Label Expression is used to compute the header of the column itself, and is evaluated in the context of the table’s target semantic element, and the Initial width, if set to a non-zero value, is used as the initial width of the column.

Column Styles

Columns can contain style definition to set the style of all the cells on these columns. However, these styles can be overridden by the styles which may be present in the line mappings for the cells of this column. The style definition elements, including support for conditional styles, is the same as for style associated to line mappings. Refer to the corresponding section for more details.

Column Tools

Column can currently only define a Label edit tool, which will apply to all the cells of the column. It works like all edit The Edit Mask element (contained inside the tool) is used to parse the new label’s value as entered by the user, and to select part of this label as input variables to the editing action’s body. The mask can contain substrings of the form {N} where N is a number. The parts of the new label’s value which correspond to these substring will be available as variables named argN. For example, with an edit mask of {0}:{1} and an input string entered by the user of attr : EString, the tool’s body would be executed with variables arg0 set to attr␣ and arg1 set to ␣EString.

Cross Tables

Cross Tables are slightly different from edition tables. They are optimized to represent relationship between elements in a matrix-like way. Both lines and columns represent elements, and each call at an intersection if a certain relationship exists between them. Cross tables also support sub-lines, but not sub-columns. However provided the right tools are specified, users can create and/or delete columns in addition to lines.

Cross tables are specified using a Cross Table Description element, which works exactly like Edition Table Description elements. The differences appear in the type of elements they can contain.

Table Tools

Cross tables can contain the same kinds of tools as edition tables (see the corresponding section for details). In addition, they can contain Create Column Tools, which behave exactly like Create Line tools, except that they apply to Element Column mappings (see below) and are used to create new columns in the table.

Tools Specification

Refer to Tools specification

Element Column Mappings

In cross tables, columns represent elements instead of elements' properties (as is the case for edition tables). The set of columns is defined by one or more Element Column mappings. They are almost identical to line mappings, except that:

Element Column mappings can contain a Create Column Tool and a Delete Column Tool, which are specified and behave in a similar way than the Create Line and Delete Line tools for line mappings.

They can also contain style definitions (including conditional style), which apply to all the cells in the column (unless overridden by the intersection mapping or by the line mapping if any).

Intersection Mappings

The line and element column mappings in a cross table define which lines and columns will be present in the tables, but not the contents of the cells. This is defined by Intersection mappings. The Line Mapping and Column Mapping properties indicate which cells the mapping describes. The Label Expression, evaluated in the context of the cell’s targets semantic element, should return the text to show in the cell, while the Can Edit expression indicates whether or not the cell’s value can be edited by end-users.

There are two slightly different use cases for intersection mapping, which use different sub-sets of the remaining properties:

  1. Intersections which represent a relation between the element on a line and the element on a column. For example, if both lines and columns represented UML classes, this could be the “super-class” reference between a class and those it inherits from;
  2. Intersections which represent a semantic element (instead of just a relation) which is itself related to both the element on the line and the element on a column. To continue with the UML example, this would be used to represent UML Associations, which are full-blown objects representing a relationship between classes.

If you are familiar with it, this is similar to Relation Based Edges and Element Based Edges in Sirius diagrams.

In the first case (“relation-based intersection”), the semantic element of a cell will the the semantic element of the cell’s line. To configure such an intersection, you must only set the Column Finder Expression: from a line’s semantic target element, it should return the semantic element of the column in which the cell should appear.

The second use case (“element-based intersection”) is enabled by setting the Use Domain Class flag in the Domain Based category. You must then indicate the Domain Class of the elements which will be represented by the cells, and the Semantic Candidates Expression. The expression will be evaluated in the context of the whole table’s semantic element, and should return all elements (instances of the Domain Class) which should be represented by cells. These elements will be the semantic target element of the cell. You can use the Precondition Expression and Associated elements expression ( Advanced category) with the same semantics as for other mappings. Finally, you must set both the Column Finder Expression ( General category) and the Line Finder Expression ( Domain Based category): they will both be evaluated in the context of the cell’s semantic element, and should return the semantic elements of the column and line at which the intersection should appear. In our example, these would be expressions which, from the Association element, find the source and target classes of the association.

Intersection Style

An Intersection mapping can contain style elements, including conditional styles. If they are present, they override any style set on the corresponding column mapping or line mapping.

Intersection Tools

Intersection mappings can contain two kinds of tools: