Eclipse Community Forums: GMF (Graphical Modeling Framework) » How to create nodes programmatically?

Search

Help

Login

Home » Modeling » GMF (Graphical Modeling Framework) » How to create nodes programmatically?(Problem : nodes are stored in the Domain Model but they aren't shown in the Diagram view)

Show: Today's Messages :: Show Polls :: Message Navigator

Switch to threaded view of this topic

Create a new topic

Submit Reply

How to create nodes programmatically? [message #668831]

Sun, 08 May 2011 08:36

iDeveloper is currently offline

iDeveloper
Messages: 1
Registered: May 2011
Location: Algeria

Junior Member

Hey, i'm trying to add automatically nodes to my diagram. So, this is what i did exactly :

private static Bigraphe createInitialModel() {
	Bigraphe bigraphe = BigrapheFactory.eINSTANCE.createBigraphe();
	Region reg = BigrapheFactory.eINSTANCE.createRegion();
        bigraphe.setNom("Bigraphe");
	reg.setNom("Reg1");
	bigraphe.getContenirRegions().add(reg);
	return bigraphe;
}

But when i run the Diagram my nodes are stored in the Domain Model but they aren't shown in the diagram view. somebody help please!

Report message to a moderator

(no subject) [message #669365 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669368 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669369 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669372 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669377 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669383 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669384 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669387 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669391 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669394 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669395 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669398 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669402 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669405 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669410 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669416 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669417 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669421 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669425 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669427 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669434 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669435 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669437 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669438 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669439 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669445 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669446 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669452 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669453 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669457 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669458 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669461 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669462 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669464 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669472 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669474 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669479 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669482 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

(no subject) [message #669485 is a reply to message #668831]

Tue, 10 May 2011 01:51

Jevon is currently offline

Jevon
Messages: 164
Registered: July 2009

Senior Member

Hi,

Have you checked that Region elements can be displayed in the diagram
editor, i.e. there is the .gmfgraph Node and corresponding .gmfmap
mapping between the Region and RegionFigure?

Jevon

iDeveloper wrote:
> Hey, i'm trying to add automatically nodes to my diagram.
> So, this is what i did exactly :
>
> private static Bigraphe createInitialModel() {
> Bigraphe bigraphe =
> BigrapheFactory.eINSTANCE.createBigraphe();
> Region reg = BigrapheFactory.eINSTANCE.createRegion();
> bigraphe.setNom("Bigraphe");
> reg.setNom("Reg1");
> bigraphe.getContenirRegions().add(reg);
> return bigraphe;
> }
> But when i run the Diagram my nodes are stored in the Domain
> Model but they aren't shown in the diagram view. somebody
> help please!
>

Report message to a moderator

Pages (2): [1 2 › »]

Switch to threaded view of this topic

Create a new topic

Submit Reply

Previous Topic:	propagating selections/selected state
Next Topic:	Strange problem when creating a top node

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat May 18 15:31:15 EDT 2013

Powered by FUDForum. Page generated in 0.02971 seconds