Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Modeling » UML2 Tools » How to install UML2-Tools on Helios
How to install UML2-Tools on Helios [message #544887] Mon, 05 July 2010 17:24 Go to next message
Ed Willink is currently offline Ed Willink
Messages: 3151
Registered: July 2009
Senior Member
Hi

Until a Helios release of UML2-Tools is made available to correct the
erroneous org.eclipse.emf.ocl dependency, the following workaround may
be used.

See
http://wiki.eclipse.org/MDT/OCL/FAQ#How_do_I_workaround_org. eclipse.emf.ocl_deprecation_in_Helios_and_later.3F

Regards

Ed Willink

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #545138 is a reply to message #544887] Tue, 06 July 2010 14:07 Go to previous messageGo to next message
Misoullee is currently offline Misoullee
Messages: 34
Registered: July 2009
Member
It is very unfortunate which UML2 TOOLS project is not active.
i wait for UML2 TOOLS 1.0 to be coming up in Helios ago long time.
i have worked many modeling projects with the UML2 TOOLS.
However, This solution is so pleasant for everyone use UML2TOOLS.
Thanks a lot.

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #545236 is a reply to message #544887] Wed, 07 July 2010 05:40 Go to previous messageGo to next message
Eclipse User
Originally posted by: formatzeh.gmx.de

Thanks a lot Ed - this is a great help and works perfectly

Ed Willink wrote:
> Hi
>
> Until a Helios release of UML2-Tools is made available to correct the
> erroneous org.eclipse.emf.ocl dependency, the following workaround may
> be used.
>
> See
> http://wiki.eclipse.org/MDT/OCL/FAQ#How_do_I_workaround_org. eclipse.emf.ocl_deprecation_in_Helios_and_later.3F
>
>
> Regards
>
> Ed Willink

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #545436 is a reply to message #545236] Wed, 07 July 2010 14:05 Go to previous messageGo to next message
Ed Willink is currently offline Ed Willink
Messages: 3151
Registered: July 2009
Senior Member
Hi

On 07/07/2010 10:40, Gilbert Mirenque wrote:
> Thanks a lot Ed - this is a great help and works perfectly

I'm pleased it helps, but beware that it is very dangerous, because it
practically claims that Galileo and Helios are the same, undermining
p2's ability to ensure consistency.

I've 'successfully' created an installation in which the Sample Ecore
Editor is not in the Open With menu so that when it is invoked manually
you get a perverse ClassNotFoundException.

Make sure that you install everything you may need from Helios sites,
then install the patch, then install UML2-Tools last. Don't install
anything else later.

Regards

Ed Willink

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #549367 is a reply to message #544887] Mon, 26 July 2010 10:14 Go to previous messageGo to next message
Christian Waniek is currently offline Christian Waniek
Messages: 50
Registered: May 2010
Member
Hi

there is an incubation build which isn't far from a release build.

http:// modeling.eclipse.org/modeling/mdt/downloads/?project=uml2too ls&showAll=0&showMax=5&sortBy=date

This should do a better job than any workaraound as there are also a lot of fixed bugs and enhancements in it.

Regards
Christian Waniek

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #625823 is a reply to message #544887] Tue, 06 July 2010 14:07 Go to previous messageGo to next message
Misoullee is currently offline Misoullee
Messages: 34
Registered: July 2009
Member
It is very unfortunate which UML2 TOOLS project is not active.
i wait for UML2 TOOLS 1.0 to be coming up in Helios ago long time.
i have worked many modeling projects with the UML2 TOOLS.
However, This solution is so pleasant for everyone use UML2TOOLS.
Thanks a lot.

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #625825 is a reply to message #544887] Wed, 07 July 2010 05:40 Go to previous messageGo to next message
Eclipse User
Originally posted by: formatzeh.gmx.de

Thanks a lot Ed - this is a great help and works perfectly

Ed Willink wrote:
> Hi
>
> Until a Helios release of UML2-Tools is made available to correct the
> erroneous org.eclipse.emf.ocl dependency, the following workaround may
> be used.
>
> See
> http://wiki.eclipse.org/MDT/OCL/FAQ#How_do_I_workaround_org. eclipse.emf.ocl_deprecation_in_Helios_and_later.3F
>
>
> Regards
>
> Ed Willink

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #625826 is a reply to message #545236] Wed, 07 July 2010 14:05 Go to previous messageGo to next message
Ed Willink is currently offline Ed Willink
Messages: 3151
Registered: July 2009
Senior Member
Hi

On 07/07/2010 10:40, Gilbert Mirenque wrote:
> Thanks a lot Ed - this is a great help and works perfectly

I'm pleased it helps, but beware that it is very dangerous, because it
practically claims that Galileo and Helios are the same, undermining
p2's ability to ensure consistency.

I've 'successfully' created an installation in which the Sample Ecore
Editor is not in the Open With menu so that when it is invoked manually
you get a perverse ClassNotFoundException.

Make sure that you install everything you may need from Helios sites,
then install the patch, then install UML2-Tools last. Don't install
anything else later.

Regards

Ed Willink

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #625869 is a reply to message #544887] Mon, 26 July 2010 10:14 Go to previous messageGo to next message
Christian Waniek is currently offline Christian Waniek
Messages: 50
Registered: May 2010
Member
Hi

there is an incubation build which isn't far from a release build.

http://modeling.eclipse.org/modeling/mdt/downloads/?project= uml2tools&showAll=0&showMax=5&sortBy=date

This should do a better job than any workaraound as there are also a lot of fixed bugs and enhancements in it.

Regards
Christian Waniek

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #635667 is a reply to message #544887] Wed, 27 October 2010 12:51 Go to previous messageGo to next message
Thomas Jung is currently offline Thomas Jung
Messages: 5
Registered: October 2010
Junior Member
Hello,

I tried to get that workaround running with Eclipse 3.6.1
(Modeling) on Windows, but get the error:

---snip---
'Installing Software' has encountered a problem.
An error occured while collecting items to be installed
---snap---
See:
http://tjung.lima-city.de/eclipse/update/local/

if I update the "mdt-uml2tools-Update-incubation-0.9.0"
from a local repository.

Btw:
A manual install and just copy the content of
"mdt-uml2tools-SDK-incubation-N201009140751.zip"
to the eclipse directory shows only
"Composite Sructures Diagram", "Deployment Diagram"
"Sequence Diagram" and "Use Case Diagram", but not
"Class Diagram" or other diagrams.

What do I have to do to enable the other types of diagrams
or what can I do to get all that UML2 Tools running?

Thomas

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #653040 is a reply to message #544887] Tue, 08 February 2011 03:34 Go to previous messageGo to next message
sunita Mising name is currently offline sunita Mising name
Messages: 12
Registered: February 2011
Junior Member
hi
could anyone tell me how to use uml2 tools in eclipse helios .i have download the uml2 tools from this site http://modeling.eclipse.org/modeling/mdt/downloads/?project= uml2tools but i dnt knw how to use it ......................

Report message to a moderator

Re: How to install UML2-Tools on Helios [message #658846 is a reply to message #544887] Wed, 09 March 2011 21:44 Go to previous message
ray is currently offline ray
Messages: 2
Registered: March 2011
Junior Member
Very Happy thanks, it works well

Report message to a moderator

Previous Topic:Extension Point for catching "Add Note"
Next Topic:Switching package view breaks diagram
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun May 19 20:11:15 EDT 2013

Powered by FUDForum. Page generated in 0.01896 seconds