Home » Modeling » TMF (Xtext) » xtext newbie
| xtext newbie [message #34835] |
Fri, 27 March 2009 09:06  |
 Christophe Bouhier
Messages: 684
Registered: July 2009 |
Senior Member |
|
|
Hi,
1. I can use xtext inside an 3.5M6 installation, simply by using this link:
http://oawbranch.pluginbuilder.org/releases/p2-updateSite/
2. But if I go to TMF's build and dependencies, download them one by one
and put them in the dropins folder, I miss the option to generate the
"xtext artifacts"
Does this mean tmf's version of xtext is not ready for consumption yet?
...or I am not setting it up correctly?
rgds Christophe
|
|
|
| Re: xtext newbie [message #34898 is a reply to message #34835] |
Fri, 27 March 2009 10:42  |
Sebastian Zarnekow
Messages: 2788
Registered: July 2009 |
Senior Member |
|
|
Hi Christoph,
the link is valid for oAW Xtext. You'll find TMF Xtext on a regular
Eclipse update site: http://www.eclipse.org/modeling/tmf/updates/
But the preconfigured TMF Xtext distro that you'll find here:
http://oaw.itemis.de/openarchitectureware/language=de/660/do wnloads is a
lot easier to consume, as it contains some optional plugins, too.
However, you won't find any Create Xtext artifacts Action. Instead
you'll have to run a workflow. See our Getting started guide at
http://wiki.eclipse.org/Xtext/GettingStarted.
Regards,
Sebastian
Christophe Bouhier schrieb:
> Hi,
>
>
> 1. I can use xtext inside an 3.5M6 installation, simply by using this link:
>
> http://oawbranch.pluginbuilder.org/releases/p2-updateSite/
>
>
> 2. But if I go to TMF's build and dependencies, download them one by one
> and put them in the dropins folder, I miss the option to generate the
> "xtext artifacts"
>
> Does this mean tmf's version of xtext is not ready for consumption yet?
> ..or I am not setting it up correctly?
>
> rgds Christophe
|
|
|
| Re: xtext newbie [message #34927 is a reply to message #34898] |
Fri, 27 March 2009 10:47 |
Christophe Bouhier
Messages: 684
Registered: July 2009 |
Senior Member |
|
|
Hi,
Thanks! this helps a lot. Interesting the getting started doc. is not
referred from this page:
http://wiki.eclipse.org/Xtext
Cheers Christophe
Sebastian Zarnekow wrote:
> Hi Christoph,
>
> the link is valid for oAW Xtext. You'll find TMF Xtext on a regular
> Eclipse update site: http://www.eclipse.org/modeling/tmf/updates/
>
> But the preconfigured TMF Xtext distro that you'll find here:
> http://oaw.itemis.de/openarchitectureware/language=de/660/do wnloads is a
> lot easier to consume, as it contains some optional plugins, too.
>
> However, you won't find any Create Xtext artifacts Action. Instead
> you'll have to run a workflow. See our Getting started guide at
> http://wiki.eclipse.org/Xtext/GettingStarted.
>
> Regards,
> Sebastian
>
> Christophe Bouhier schrieb:
>> Hi,
>>
>>
>> 1. I can use xtext inside an 3.5M6 installation, simply by using this
>> link:
>>
>> http://oawbranch.pluginbuilder.org/releases/p2-updateSite/
>>
>>
>> 2. But if I go to TMF's build and dependencies, download them one by
>> one and put them in the dropins folder, I miss the option to generate
>> the "xtext artifacts"
>>
>> Does this mean tmf's version of xtext is not ready for consumption yet?
>> ..or I am not setting it up correctly?
>>
>> rgds Christophe
|
|
|
| Re: xtext newbie [message #34995 is a reply to message #34927] |
Fri, 27 March 2009 10:53 |
Sebastian Zarnekow
Messages: 2788
Registered: July 2009 |
Senior Member |
|
|
Hi Christophe,
I'm pretty sure it is ;-)
Thanks for the hint.
Regards,
Sebastian
Christophe Bouhier schrieb:
> Hi,
>
> Thanks! this helps a lot. Interesting the getting started doc. is not
> referred from this page:
>
> http://wiki.eclipse.org/Xtext
>
> Cheers Christophe
>
> Sebastian Zarnekow wrote:
>> Hi Christoph,
>>
>> the link is valid for oAW Xtext. You'll find TMF Xtext on a regular
>> Eclipse update site: http://www.eclipse.org/modeling/tmf/updates/
>>
>> But the preconfigured TMF Xtext distro that you'll find here:
>> http://oaw.itemis.de/openarchitectureware/language=de/660/do wnloads is
>> a lot easier to consume, as it contains some optional plugins, too.
>>
>> However, you won't find any Create Xtext artifacts Action. Instead
>> you'll have to run a workflow. See our Getting started guide at
>> http://wiki.eclipse.org/Xtext/GettingStarted.
>>
>> Regards,
>> Sebastian
>>
>> Christophe Bouhier schrieb:
>>> Hi,
>>>
>>>
>>> 1. I can use xtext inside an 3.5M6 installation, simply by using this
>>> link:
>>>
>>> http://oawbranch.pluginbuilder.org/releases/p2-updateSite/
>>>
>>>
>>> 2. But if I go to TMF's build and dependencies, download them one by
>>> one and put them in the dropins folder, I miss the option to generate
>>> the "xtext artifacts"
>>>
>>> Does this mean tmf's version of xtext is not ready for consumption yet?
>>> ..or I am not setting it up correctly?
>>>
>>> rgds Christophe
|
|
|
| Re: xtext newbie [message #35063 is a reply to message #34995] |
Fri, 27 March 2009 10:57 |
Christophe Bouhier
Messages: 684
Registered: July 2009 |
Senior Member |
|
|
Sebastian Zarnekow wrote:
> Hi Christophe,
>
> I'm pretty sure it is ;-)
> Thanks for the hint.
>
Unless you are joking ? I really don't see it there....:-)
> Regards,
> Sebastian
>
> Christophe Bouhier schrieb:
>> Hi,
>>
>> Thanks! this helps a lot. Interesting the getting started doc. is not
>> referred from this page:
>>
>> http://wiki.eclipse.org/Xtext
>>
>> Cheers Christophe
>>
>> Sebastian Zarnekow wrote:
>>> Hi Christoph,
>>>
>>> the link is valid for oAW Xtext. You'll find TMF Xtext on a regular
>>> Eclipse update site: http://www.eclipse.org/modeling/tmf/updates/
>>>
>>> But the preconfigured TMF Xtext distro that you'll find here:
>>> http://oaw.itemis.de/openarchitectureware/language=de/660/do wnloads
>>> is a lot easier to consume, as it contains some optional plugins, too.
>>>
>>> However, you won't find any Create Xtext artifacts Action. Instead
>>> you'll have to run a workflow. See our Getting started guide at
>>> http://wiki.eclipse.org/Xtext/GettingStarted.
>>>
>>> Regards,
>>> Sebastian
>>>
>>> Christophe Bouhier schrieb:
>>>> Hi,
>>>>
>>>>
>>>> 1. I can use xtext inside an 3.5M6 installation, simply by using
>>>> this link:
>>>>
>>>> http://oawbranch.pluginbuilder.org/releases/p2-updateSite/
>>>>
>>>>
>>>> 2. But if I go to TMF's build and dependencies, download them one by
>>>> one and put them in the dropins folder, I miss the option to
>>>> generate the "xtext artifacts"
>>>>
>>>> Does this mean tmf's version of xtext is not ready for consumption yet?
>>>> ..or I am not setting it up correctly?
>>>>
>>>> rgds Christophe
|
|
|
| Re: xtext newbie [message #35096 is a reply to message #34898] |
Fri, 27 March 2009 11:06 |
Christophe Bouhier
Messages: 684
Registered: July 2009 |
Senior Member |
|
|
The 3.5M6 - xtext distro for Mac Cocoa :
http://xtext.itemis.com/distros/eclipse-SDK-3.5M6-xtext-0.7M 6a-macosx-cocoa.tar.gz
doesn't contain the xtext plugins nor dependencies. Is this intentional?
Sebastian Zarnekow wrote:
> Hi Christoph,
>
> the link is valid for oAW Xtext. You'll find TMF Xtext on a regular
> Eclipse update site: http://www.eclipse.org/modeling/tmf/updates/
>
> But the preconfigured TMF Xtext distro that you'll find here:
> http://oaw.itemis.de/openarchitectureware/language=de/660/do wnloads is a
> lot easier to consume, as it contains some optional plugins, too.
>
> However, you won't find any Create Xtext artifacts Action. Instead
> you'll have to run a workflow. See our Getting started guide at
> http://wiki.eclipse.org/Xtext/GettingStarted.
>
> Regards,
> Sebastian
>
> Christophe Bouhier schrieb:
>> Hi,
>>
>>
>> 1. I can use xtext inside an 3.5M6 installation, simply by using this
>> link:
>>
>> http://oawbranch.pluginbuilder.org/releases/p2-updateSite/
>>
>>
>> 2. But if I go to TMF's build and dependencies, download them one by
>> one and put them in the dropins folder, I miss the option to generate
>> the "xtext artifacts"
>>
>> Does this mean tmf's version of xtext is not ready for consumption yet?
>> ..or I am not setting it up correctly?
>>
>> rgds Christophe
|
|
| |
| Re: xtext newbie [message #35276 is a reply to message #35063] |
Fri, 27 March 2009 12:20 |
Sven Efftinge
Messages: 1667
Registered: July 2009 |
Senior Member |
|
|
Christophe Bouhier schrieb:
> Sebastian Zarnekow wrote:
>> Hi Christophe,
>>
>> I'm pretty sure it is ;-)
>> Thanks for the hint.
>>
> Unless you are joking ? I really don't see it there....:-)
Have you had another look? Sebastian just added it.
Sven
--
Need professional support for Xtext and EMF?
Go to: http://xtext.itemis.com
Twitter : @svenefftinge
Blog : blog.efftinge.de
|
|
|
Goto Forum:
Current Time: Wed May 22 22:12:02 EDT 2013
Powered by FUDForum. Page generated in 0.01701 seconds
|
] 
Search
Help
Register
Login
Home
