EclipseLink 2.4.2, build 'v20130514-5956486' API Reference

org.eclipse.persistence.queries
Class ObjectLevelReadQuery

java.lang.Object
  extended by org.eclipse.persistence.queries.DatabaseQuery
      extended by org.eclipse.persistence.queries.ReadQuery
          extended by org.eclipse.persistence.queries.ObjectBuildingQuery
              extended by org.eclipse.persistence.queries.ObjectLevelReadQuery
All Implemented Interfaces:
java.io.Serializable, java.lang.Cloneable
Direct Known Subclasses:
ReadAllQuery, ReadObjectQuery

public abstract class ObjectLevelReadQuery
extends ObjectBuildingQuery

Purpose: Abstract class for all read queries using objects.

Description: Contains common behavior for all read queries using objects.

See Also:
Serialized Form
Author:
Yvon Lavoie
Since:
TOPLink/Java 1.0

Field Summary
protected  java.util.List<java.lang.Object> additionalFields
          Allow for additional fields to be selected, used for m-m batch reading.
protected  BatchFetchPolicy batchFetchPolicy
          Defines batch fetching configuration.
protected  int cacheUsage
          Allow for the cache usage to be specified to enable in-memory querying.
static int CheckCacheByExactPrimaryKey
           
static int CheckCacheByPrimaryKey
           
static int CheckCacheOnly
           
static int CheckCacheThenDatabase
           
protected  java.util.Map<java.lang.Class,org.eclipse.persistence.internal.databaseaccess.DatabaseCall> concreteSubclassCalls
          Allow concrete subclasses calls to be prepared and cached for inheritance queries.
protected  java.util.Map<java.lang.Class,java.util.Map<DatabaseMapping,java.lang.Object>> concreteSubclassJoinedMappingIndexes
          Allow concrete subclasses joined mapping indexes to be prepared and cached for inheritance queries.
static int ConformResultsInUnitOfWork
           
protected  ExpressionBuilder defaultBuilder
          Provide a default builder so that it's easier to be consistent
protected  short distinctState
          Indicates if distinct should be used or not.
static int DoNotCheckCache
           
static short DONT_USE_DISTINCT
           
protected  org.eclipse.persistence.internal.queries.EntityFetchGroup entityFetchGroup
          Derived from fetchGroup, set on all objects returned by the query.
protected  FetchGroup fetchGroup
          FetchGroup specified on this query.
protected  java.lang.String fetchGroupName
          Name of FetchGroup stored in the FetchGroupManager of the reference class' descriptor or any of its parent descriptors.
protected  int inMemoryQueryIndirectionPolicy
          Used to determine behavior of indirection in in-memory querying and conforming.
protected  boolean isPrePrepared
          Allow a prePrepare stage to build the expression for EJBQL and QBE and resolve joining.
protected  boolean isReadOnly
          PERF: Allow queries to be defined as read-only in unit of work execution.
protected  java.lang.Boolean isReferenceClassLocked
          PERF: Caches locking policy isReferenceClassLocked setting.
protected  boolean isResultSetOptimizedQuery
          PERF: Allow queries to build directly from the database result-set.
protected  org.eclipse.persistence.internal.queries.JoinedAttributeManager joinedAttributeManager
          Stores the helper object for dealing with joined attributes
protected  LoadGroup loadGroup
          Specifies indirection that should be instantiated before returning result
protected  java.lang.String lockModeType
          Used when specifying a lock mode for the query
static java.lang.String NONE
          Names of the possible lock mode types, JPA 2.0 only
protected  java.util.List<Expression> nonFetchJoinAttributeExpressions
          Stores the non fetchjoin attributes, these are joins that will be represented in the where clause but not in the select.
static java.lang.String OPTIMISTIC
           
static java.lang.String OPTIMISTIC_FORCE_INCREMENT
           
protected  java.util.List<Expression> orderByExpressions
          Used for ordering support.
protected  java.util.List<Expression> partialAttributeExpressions
          Stores the partial attributes that have been added to this query
static java.lang.String PESSIMISTIC_
           
static java.lang.String PESSIMISTIC_FORCE_INCREMENT
           
static java.lang.String PESSIMISTIC_READ
           
static java.lang.String PESSIMISTIC_WRITE
           
static java.lang.String READ
          Names of the possible lock mode types, JPA 1.0 and 2.0
protected  boolean shouldExtendPessimisticLockScope
          Indicates whether pessimistic lock should also be applied to relation tables (ManyToMany and OneToOne mappings), reference tables (DirectCollection and AggregateCollection mapping).
protected  boolean shouldIncludeData
          Allow for a complex result to be return including the rows and objects, used for m-m batch reading.
protected  java.lang.Boolean shouldOuterJoinSubclasses
          Define if an outer join should be used to read subclasses.
protected  boolean shouldUseDefaultFetchGroup
          Flag to turn on/off the use of the default fetch group.
static short UNCOMPUTED_DISTINCT
           
protected  java.util.List<Expression> unionExpressions
          Allow a query's results to be unioned (UNION, INTERSECT, EXCEPT) with another query results.
static short USE_DISTINCT
           
static int UseDescriptorSetting
           
protected  java.lang.Integer waitTimeout
          waitTimeout has three possible setting: null, 0 and 1..N null: use the session.getPessimisticLockTimeoutDefault() if available. 0: issue a LOCK_NOWAIT 1..N: use this value to set the WAIT clause.
static java.lang.String WRITE
           
 
Fields inherited from class org.eclipse.persistence.queries.ObjectBuildingQuery
DEFAULT_LOCK_MODE, executionTime, isCacheCheckComplete, LOCK, LOCK_NOWAIT, LOCK_RESULT_PROPERTY, lockingClause, NO_LOCK, prefetchedCacheKeys, referenceClass, referenceClassName, requiresDeferredLocks, shouldBuildNullForNullPk, shouldRefreshIdentityMapResult, shouldRefreshRemoteIdentityMapResult, shouldRegisterResultsInUnitOfWork, shouldUseExclusiveConnection, wasDefaultLockMode
 
Fields inherited from class org.eclipse.persistence.queries.ReadQuery
fetchSize, firstResult, maxRows, queryId, queryResultCachingPolicy, temporaryCachedQueryResults
 
Fields inherited from class org.eclipse.persistence.queries.DatabaseQuery
accessors, allowNativeSQLQuery, argumentFields, arguments, argumentTypeNames, argumentTypes, argumentValues, BATCH_FETCH_PROPERTY, CascadeAggregateDelete, CascadeAllParts, CascadeByMapping, CascadeDependentParts, cascadePolicy, CascadePrivateParts, descriptor, doNotRedirect, executionSession, flushOnExecute, hintString, isCustomQueryUsed, isExecutionClone, isNativeConnectionRequired, isPrepared, isUserDefined, isUserDefinedSQLCall, monitorName, name, NoCascading, nullableArguments, parameterDelimiter, partitioningPolicy, properties, queryMechanism, queryTimeout, redirector, session, sessionName, shouldBindAllParameters, shouldCacheStatement, shouldCloneCall, shouldMaintainCache, shouldPrepare, shouldRetrieveBypassCache, shouldStoreBypassCache, shouldUseWrapperPolicy, shouldValidateUpdateCallCacheUse, sourceMapping, translationRow
 
Constructor Summary
ObjectLevelReadQuery()
          INTERNAL: Initialize the state of the query
 
Method Summary
 void acquireLocks()
          PUBLIC: Set the query to lock, this will also turn refreshCache on.
 void acquireLocksWithoutWaiting()
          PUBLIC: Set the query to lock without waiting (blocking), this will also turn refreshCache on.
 void addAdditionalField(org.eclipse.persistence.internal.helper.DatabaseField field)
          INTERNAL: Additional fields can be added to a query.
 void addAdditionalField(Expression fieldExpression)
          INTERNAL: Additional fields can be added to a query.
 void addBatchReadAttribute(Expression attributeExpression)
          PUBLIC: Specify the foreign-reference mapped attribute to be optimized in this query.
 void addBatchReadAttribute(java.lang.String attributeName)
          PUBLIC: Specify the foreign-reference mapped attribute to be optimized in this query.
 void addDescendingOrdering(java.lang.String queryKeyName)
          PUBLIC: Order the query results by the object's attribute or query key name.
 void addJoinedAttribute(Expression attributeExpression)
          PUBLIC: Specify the attribute to be join fetched in this query.
 void addJoinedAttribute(java.lang.String attributeName)
          PUBLIC: Specify the relationship attribute to be join fetched in this query.
 void addJoinSelectionFields(java.util.Vector fields, boolean isCustomSQL)
          INTERNAL: The method adds to the passed input vector the fields or expressions corresponding to the joins.
 void addNonFetchJoin(Expression target)
          PUBLIC: Specify the object expression to be joined in this query.
 void addNonFetchJoinedAttribute(Expression attributeExpression)
          PUBLIC: Specify the relationship attribute to be join in this query.
 void addNonFetchJoinedAttribute(java.lang.String attributeName)
          PUBLIC: Specify the relationship attribute to be join in this query.
 void addOrdering(Expression orderingExpression)
          PUBLIC: Add the ordering expression.
 void addPartialAttribute(Expression attributeExpression)
          Deprecated. since EclipseLink 2.1, partial attributes replaced by fetch groups.
 void addPartialAttribute(java.lang.String attributeName)
          Deprecated. since EclipseLink 2.1, partial attributes replaced by fetch groups.
protected  void addSelectionFieldsForJoinedExpression(java.util.List fields, boolean isCustomSQL, Expression expression)
          INTERNAL: The method adds to the passed input vector the fields or expressions corresponding to the passed join expression.
 void addUnionExpression(Expression union)
          PUBLIC: Add the union expression to the query.
 java.lang.Object buildObject(org.eclipse.persistence.internal.sessions.AbstractRecord row)
          INTERNAL: Used to build the object, and register it if in the context of a unit of work.
 void changeDescriptor(org.eclipse.persistence.internal.sessions.AbstractSession theSession)
          INTERNAL: The reference class has been changed, need to reset the descriptor.
 void checkCacheOnly()
          PUBLIC: The cache will checked completely, if the object is not found null will be returned or an error if the query is too complex.
 void checkDescriptor(org.eclipse.persistence.internal.sessions.AbstractSession session)
          INTERNAL: Ensure that the descriptor has been set.
 java.lang.Object checkEarlyReturn(org.eclipse.persistence.internal.sessions.AbstractSession session, org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
          INTERNAL: Check to see if this query already knows the return value without performing any further work.
protected abstract  java.lang.Object checkEarlyReturnLocal(org.eclipse.persistence.internal.sessions.AbstractSession session, org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
          INTERNAL: Contains the body of the check early return call, implemented by subclasses.
 void checkPrepare(org.eclipse.persistence.internal.sessions.AbstractSession session, org.eclipse.persistence.internal.sessions.AbstractRecord translationRow, boolean force)
          INTERNAL: Check to see if this query needs to be prepare and prepare it.
protected  void checkPrePrepare(org.eclipse.persistence.internal.sessions.AbstractSession session)
          INTERNAL: ObjectLevelReadQueries now have an explicit pre-prepare stage, which is for checking for pessimistic locking, and computing any joined attributes declared on the descriptor.
 java.lang.Object clone()
          INTERNAL: Clone the query
 void computeBatchReadMappingQueries()
          INTERNAL: Used to optimize joining by pre-computing the nested join queries for the mappings.
protected  void computeNestedQueriesForBatchReadExpressions(java.util.List<Expression> batchReadExpressions)
          INTERNAL: This method is used when computing the nested queries for batch read mappings.
protected  java.lang.Object conformIndividualResult(java.lang.Object clone, org.eclipse.persistence.internal.sessions.UnitOfWorkImpl unitOfWork, org.eclipse.persistence.internal.sessions.AbstractRecord arguments, Expression selectionCriteriaClone, java.util.Map alreadyReturned)
          INTERNAL: Conforms and registers an individual result.
 void conformResultsInUnitOfWork()
          PUBLIC: The cache will checked completely, if the object is not found the database will be queried, and the database result will be verified with what is in the cache and/or unit of work including new objects.
 void copyFromQuery(DatabaseQuery query)
          INTERNAL: Copy all setting from the query.
 java.lang.Object deepClone()
          INTERNAL: Clone the query, including its selection criteria.
 void dontAcquireLocks()
          PUBLIC: Set the query not to lock.
 void dontCheckCache()
          PUBLIC: This can be used to explicitly disable the cache hit.
 void dontRefreshIdentityMapResult()
          PUBLIC: When unset means perform read normally and dont do refresh.
 void dontRefreshRemoteIdentityMapResult()
          PUBLIC: When unset means perform read normally and dont do refresh.
 void dontUseDistinct()
          ADVANCED: If a distinct has been set the DISTINCT clause will be printed.
 boolean equals(java.lang.Object object)
          INTERNAL: Return if the query is equal to the other.
 void except(ReportQuery query)
          PUBLIC: Except the query results with the other query.
 java.lang.Object execute(org.eclipse.persistence.internal.sessions.AbstractSession session, org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
          INTERNAL: Execute the query.
 java.lang.Object executeDatabaseQuery()
          INTERNAL: Executes the prepared query on the datastore.
 java.lang.Object executeInUnitOfWork(org.eclipse.persistence.internal.sessions.UnitOfWorkImpl unitOfWork, org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
          INTERNAL: Execute the query in the unit of work.
protected abstract  java.lang.Object executeObjectLevelReadQuery()
          Executes the prepared query on the datastore.
protected abstract  java.lang.Object executeObjectLevelReadQueryFromResultSet()
          Executes the prepared query on the datastore.
 void extendPessimisticLockScope()
          INTERNAL: Extends pessimistic lock scope.
 java.util.List<java.lang.Object> getAdditionalFields()
          INTERNAL: Additional fields can be added to a query.
 AsOfClause getAsOfClause()
          ADVANCED: Answers the past time this query is as of.
 BatchFetchPolicy getBatchFetchPolicy()
          Return the batch fetch policy for configuring batch fetching.
 java.util.Map<java.lang.Object,java.lang.Object> getBatchObjects()
          INTERNAL: Return temporary map of batched objects.
 java.util.List<Expression> getBatchReadAttributeExpressions()
          INTERNAL: Return all attributes specified for batch reading.
 int getCacheUsage()
          PUBLIC: Return the cache usage.
 java.util.Map<java.lang.Class,org.eclipse.persistence.internal.databaseaccess.DatabaseCall> getConcreteSubclassCalls()
          INTERNAL: Return the cache of concrete subclass calls.
 java.util.Map<java.lang.Class,java.util.Map<DatabaseMapping,java.lang.Object>> getConcreteSubclassJoinedMappingIndexes()
          INTERNAL: Return the cache of concrete subclass joined mapping indexes.
 short getDistinctState()
          ADVANCED: If a distinct has been set the DISTINCT clause will be printed.
 org.eclipse.persistence.internal.queries.EntityFetchGroup getEntityFetchGroup()
          INTERNAL: Returns EntityFetchGroup that will be applied to objects returned by the query.
 java.lang.Object getExampleObject()
          PUBLIC: This method returns the current example object.
 FetchGroup getExecutionFetchGroup()
          INTERNAL: Returns FetchGroup that will be applied to the query.
 ExpressionBuilder getExpressionBuilder()
          REQUIRED: Get the expression builder which should be used for this query.
 FetchGroup getFetchGroup()
          Return the fetch group set in the query.
 java.lang.String getFetchGroupName()
          Return the fetch group name set in the query.
 java.util.Set<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupNonNestedFieldsSet()
          INTERNAL: Return the set of fields required in the select clause, for fetch group reading.
 java.util.Set<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupNonNestedFieldsSet(DatabaseMapping nestedMapping)
          INTERNAL: Return the set of fields required in the select clause, for fetch group reading.
 java.util.List<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupSelectionFields()
          INTERNAL: Return the fields required in the select clause, for fetch group reading.
protected  java.util.List<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupSelectionFields(DatabaseMapping nestedMapping)
          INTERNAL: Return the fields required in the select clause, for fetch group reading.
 InMemoryQueryIndirectionPolicy getInMemoryQueryIndirectionPolicy()
          PUBLIC: Returns the InMemoryQueryIndirectionPolicy for this query
 int getInMemoryQueryIndirectionPolicyState()
          PUBLIC: Returns the InMemoryQueryIndirectionPolicy for this query
 java.util.List getJoinedAttributeExpressions()
          INTERNAL: Convenience method for project mapping.
 org.eclipse.persistence.internal.queries.JoinedAttributeManager getJoinedAttributeManager()
          INTERNAL: Return join manager responsible for managing all aspects of joining for the query.
 LoadGroup getLoadGroup()
          Return the load group set in the query.
 org.eclipse.persistence.internal.expressions.ForUpdateClause getLockingClause()
          INTERNAL: It is not exactly as simple as a query being either locking or not.
 java.util.List<Expression> getNonFetchJoinAttributeExpressions()
          INTERNAL: Return the attributes that must be joined, but not fetched, that is, do not trigger the value holder.
 java.util.List<Expression> getOrderByExpressions()
          INTERNAL: Return the order expressions for the query.
 java.util.List<Expression> getPartialAttributeExpressions()
          INTERNAL: Return the partial attributes to select.
 java.util.Vector getPartialAttributeSelectionFields(boolean isCustomSQL)
          INTERNAL: Return the fields required in the select clause, for patial attribute reading.
 QueryByExamplePolicy getQueryByExamplePolicy()
          PUBLIC: When using Query By Example, an instance of QueryByExamplePolicy is used to customize the query.
 java.lang.Class getReferenceClass()
          PUBLIC: Return the reference class of the query.
 java.lang.String getReferenceClassName()
          INTERNAL: Return the reference class of the query.
 java.util.Vector getSelectionFields()
          INTERNAL: Return the fields selected by the query.
 java.util.List<Expression> getUnionExpressions()
          Return any union expressions.
 java.lang.Integer getWaitTimeout()
          PUBLIC: Return the WAIT timeout value of pessimistic locking query.
 boolean hasAdditionalFields()
          INTERNAL: Return if additional field.
 boolean hasAsOfClause()
          PUBLIC: Answers if the domain objects are to be read as of a past time.
 boolean hasBatchReadAttributes()
          INTERNAL: Return true is this query has batching
 boolean hasDefaultBuilder()
          INTERNAL: Checks to see if a builder has been set on the query.
 boolean hasExecutionFetchGroup()
          INTERNAL: Indicates whether a FetchGroup will be applied to the query.
 boolean hasFetchGroup()
          Return if a fetch group is set in the query.
 int hashCode()
          INTERNAL: Compute a consistent hash-code for the expression.
 boolean hasJoining()
          INTERNAL: Return if any attributes are joined.
 boolean hasNonFetchJoinedAttributeExpressions()
          INTERNAL: Return the attributes that must be joined.
 boolean hasOrderByExpressions()
          INTERNAL: The order bys are lazy initialized to conserve space.
 boolean hasPartialAttributeExpressions()
          INTERNAL: Return if partial attributes.
 boolean hasUnionExpressions()
          INTERNAL: The unions are lazy initialized to conserve space.
protected  void initializeDefaultBuilder()
          Initialize the expression builder which should be used for this query.
 void intersect(ReportQuery query)
          PUBLIC: Intersect the query results with the other query.
 boolean isAttributeBatchRead(ClassDescriptor mappingDescriptor, java.lang.String attributeName)
          INTERNAL: Return if the attribute is specified for batch reading.
 boolean isClonePessimisticLocked(java.lang.Object clone, org.eclipse.persistence.internal.sessions.UnitOfWorkImpl uow)
          INTERNAL: Helper method that checks if clone has been locked with uow.
 boolean isDefaultLock()
          INTERNAL: Helper method to determine the default mode.
 boolean isDefaultPropertiesQuery()
          INTERNAL: Return true if the query uses default properties.
 boolean isDistinctComputed()
          INTERNAL: return true if this query has computed its distinct value already
 boolean isLockQuery()
          PUBLIC: Answers if the query lock mode is known to be LOCK or LOCK_NOWAIT.
 boolean isLockQuery(Session session)
          ADVANCED: Answers if this query will issue any pessimistic locks.
 boolean isObjectLevelReadQuery()
          PUBLIC: Return if this is an object level read query.
 boolean isPartialAttribute(java.lang.String attributeName)
          INTERNAL: Return if partial attribute.
protected  boolean isPrePrepared()
          PUBLIC: Queries prepare common stated in themselves.
 boolean isPrimaryKeyQuery()
          INTERNAL: Return if the query is known to be by primary key.
 boolean isReadOnly()
          PUBLIC: Return if the query is read-only.
protected  boolean isReferenceClassLocked()
          INTERNAL: Cache the locking policy isReferenceClassLocked check.
 boolean isResultSetOptimizedQuery()
          ADVANCED: Return if the query should be optimized to build directly from the result set.
protected  void prepare()
          INTERNAL: Prepare the receiver for execution in a session.
 void prepareFetchGroup()
          INTERNAL: Add mandatory attributes to fetch group, create entityFetchGroup.
protected  void prepareForRemoteExecution()
          INTERNAL: Prepare the receiver for execution in a session.
protected  boolean prepareFromCachedQuery()
          INTERNAL: Check if the query is cached and prepare from it.
 void prepareFromQuery(DatabaseQuery query)
          INTERNAL: Prepare the query from the prepared query.
 DatabaseQuery prepareOutsideUnitOfWork(org.eclipse.persistence.internal.sessions.AbstractSession session)
          INTERNAL: There is a very special case where a query may be a bean-level pessimistic locking query.
protected  void prepareQuery()
          INTERNAL: Prepare the receiver for execution in a session.
protected  void prePrepare()
          INTERNAL: Prepare the receiver for execution in a session.
 void recordCloneForPessimisticLocking(java.lang.Object clone, org.eclipse.persistence.internal.sessions.UnitOfWorkImpl uow)
          INTERNAL: Helper method that records clone with uow if query is pessimistic locking.
 void refreshIdentityMapResult()
          PUBLIC: Refresh the attributes of the object(s) resulting from the query.
 void refreshRemoteIdentityMapResult()
          PUBLIC: Refresh the attributes of the object(s) resulting from the query.
abstract  java.lang.Object registerResultInUnitOfWork(java.lang.Object result, org.eclipse.persistence.internal.sessions.UnitOfWorkImpl unitOfWork, org.eclipse.persistence.internal.sessions.AbstractRecord arguments, boolean buildDirectlyFromRows)
          INTERNAL: All objects queried via a UnitOfWork get registered here.
 void resetDistinct()
          ADVANCED: If a distinct has been set the DISTINCT clause will be printed.
 void setAdditionalFields(java.util.List<java.lang.Object> additionalFields)
          INTERNAL: Additional fields can be added to a query.
 void setAsOfClause(AsOfClause pastTime)
          ADVANCED: Sets the query to execute as of the past time.
 void setBatchFetchPolicy(BatchFetchPolicy batchFetchPolicy)
          Set the batch fetch policy for configuring batch fetching.
 void setBatchFetchSize(int size)
          PUBLIC: Set the batch fetch size for the query.
 void setBatchFetchType(BatchFetchType type)
          PUBLIC: Set the batch fetch type for the query.
 void setBatchObjects(java.util.Map<java.lang.Object,java.lang.Object> batchObjects)
          INTERNAL: Set temporary map of batched objects.
 void setBatchReadAttributeExpressions(java.util.List<Expression> attributeExpressions)
          INTERNAL: Set all attributes specified for batch reading.
 void setCacheUsage(int cacheUsage)
          PUBLIC: Set the cache usage.
 void setDescriptor(ClassDescriptor descriptor)
          INTERNAL: Set the descriptor for the query.
 void setDistinctState(short distinctState)
          ADVANCED: If a distinct has been set the DISTINCT clause will be printed.
 void setEJBQLString(java.lang.String ejbqlString)
          PUBLIC: Set the EJBQL string of the query.
 void setExampleObject(java.lang.Object newExampleObject)
          PUBLIC: Set the example object of the query to be the newExampleObject.
 void setExpressionBuilder(ExpressionBuilder builder)
          INTERNAL Sets the default expression builder for this query.
 void setFetchGroup(FetchGroup newFetchGroup)
          Set a dynamic (use case) fetch group to the query.
 void setFetchGroupName(java.lang.String groupName)
          Set a descriptor-level pre-defined named fetch group to the query.
 void setInMemoryQueryIndirectionPolicy(InMemoryQueryIndirectionPolicy inMemoryQueryIndirectionPolicy)
          PUBLIC: Set the InMemoryQueryIndirectionPolicy for this query.
 void setInMemoryQueryIndirectionPolicyState(int inMemoryQueryIndirectionPolicy)
          PUBLIC: Set the InMemoryQueryIndirectionPolicy for this query.
 void setIsPrepared(boolean isPrepared)
          INTERNAL: Clear cached flags when un-preparing.
protected  void setIsPreparedKeepingSubclassData(boolean isPrepared)
          INTERNAL: Clear cached flags when un-preparing.
 void setIsPrePrepared(boolean isPrePrepared)
          INTERNAL: If changes are made to the query that affect the derived SQL or Call parameters the query needs to be prepared again.
 void setIsReadOnly(boolean isReadOnly)
          PUBLIC: Set the query to be read-only.
 void setIsResultSetOptimizedQuery(boolean isResultSetOptimizedQuery)
          ADVANCED: Set if the query should be optimized to build directly from the result set.
 void setJoinedAttributeExpressions(java.util.List expressions)
          INTERNAL: Convenience method for project mapping.
 void setJoinedAttributeManager(org.eclipse.persistence.internal.queries.JoinedAttributeManager joinedAttributeManager)
          INTERNAL: Set join manager responsible for managing all aspects of joining for the query.
 void setLoadGroup(LoadGroup loadGroup)
          Set a load group to the query.
 void setLockingClause(org.eclipse.persistence.internal.expressions.ForUpdateClause clause)
          INTERNAL: The locking clause contains a list of expressions representing which objects are to be locked by the query.
 void setLockMode(short lockMode)
          PUBLIC: Sets whether this is a pessimistically locking query.
 boolean setLockModeType(java.lang.String lockModeType, org.eclipse.persistence.internal.sessions.AbstractSession session)
          INTERNAL: Sets a javax.persistence.LockModeType to used with this queries execution.
 void setNonFetchJoinAttributeExpressions(java.util.List<Expression> nonFetchJoinExpressions)
          INTERNAL: Return the attributes that must be joined, but not fetched, that is, do not trigger the value holder.
 void setOrderByExpressions(java.util.List<Expression> orderByExpressions)
          INTERNAL: Set the order expressions for the query.
 void setPartialAttributeExpressions(java.util.List<Expression> partialAttributeExpressions)
          INTERNAL: Set the partial attributes to select.
 void setQueryByExamplePolicy(QueryByExamplePolicy queryByExamplePolicy)
          PUBLIC: The QueryByExamplePolicy, is a useful to customize the query when Query By Example is used.
 void setReferenceClass(java.lang.Class aClass)
          REQUIRED: Set the reference class for the query.
 void setReferenceClassName(java.lang.String aClass)
          INTERNAL: Set the reference class for the query.
 void setSelectionCriteria(Expression expression)
          PUBLIC: Set the Expression/where clause of the query.
 void setShouldExtendPessimisticLockScope(boolean isExtended)
          INTERNAL: Indicates whether pessimistic lock should also be applied to relation tables (ManyToMany and OneToOne mappings), reference tables (DirectCollection and AggregateCollection mapping).
 void setShouldFilterDuplicates(boolean shouldFilterDuplicates)
          PUBLIC: Set if duplicate rows should be filter when using 1-m joining.
 void setShouldIncludeData(boolean shouldIncludeData)
          INTERNAL: Set if the rows for the result of the query should also be returned using a complex query result.
 void setShouldOuterJoinSubclasses(boolean shouldOuterJoinSubclasses)
          PUBLIC: Set if an outer join should be used to read subclasses.
 void setShouldUseDefaultFetchGroup(boolean shouldUseDefaultFetchGroup)
          Set false if the user does not want to use the default fetch group defined in the descriptor level.
 void setUnionExpressions(java.util.List<Expression> unionExpressions)
          INTERNAL: Set any union expressions.
 void setWaitTimeout(java.lang.Integer waitTimeout)
          PUBLIC: Sets that this a pessimistic wait locking query.
 boolean shouldCheckCache()
          PUBLIC: Return if the cache should be checked.
 boolean shouldCheckCacheOnly()
          PUBLIC: Return if cache should be checked.
 boolean shouldCheckDescriptorForCacheUsage()
          PUBLIC: Return whether the descriptor's disableCacheHits setting should be checked prior to querying the cache.
 boolean shouldConformResultsInUnitOfWork()
          PUBLIC: Should the results will be checked against the changes within the unit of work and object no longer matching or deleted will be remove, matching new objects will also be added..
 boolean shouldDistinctBeUsed()
          INTERNAL: return true if this query should use a distinct
 boolean shouldExtendPessimisticLockScope()
          INTERNAL: Indicates whether pessimistic lock should also be applied to relation tables (ManyToMany and OneToOne mappings), reference tables (DirectCollection and AggregateCollection mapping).
 boolean shouldFilterDuplicates()
          PUBLIC: Return if duplicate rows should be filter when using 1-m joining.
 boolean shouldIncludeData()
          INTERNAL: Return if the rows for the result of the query should also be returned using a complex query result.
 boolean shouldOuterJoinSubclasses()
          PUBLIC: Return if an outer join should be used to read subclasses.
 boolean shouldReadAllMappings()
          INTERNAL: Return if this is a full object query, not partial nor fetch group.
 boolean shouldReadMapping(DatabaseMapping mapping)
          INTERNAL: Check if the mapping is part of the partial attributes.
 boolean shouldUseDefaultFetchGroup()
          Return false if the query does not use the default fetch group defined in the descriptor level.
 java.lang.String toString()
           
 void union(ReportQuery query)
          PUBLIC: Union the query results with the other query.
 void useDistinct()
          ADVANCED: If a distinct has been set the DISTINCT clause will be printed.
 
Methods inherited from class org.eclipse.persistence.queries.ObjectBuildingQuery
clonedQueryExecutionComplete, convertClassNamesToClasses, getDataResults, getExecutionTime, getLockMode, getPrefetchedCacheKeys, getQueryPrimaryKey, isAttributeJoined, isCacheCheckComplete, isObjectBuildingQuery, isRegisteringResults, postRegisterIndividualResult, prepareCustomQuery, registerIndividualResult, requiresDeferredLocks, setExecutionTime, setPrefetchedCacheKeys, setRequiresDeferredLocks, setShouldBuildNullForNullPk, setShouldRefreshIdentityMapResult, setShouldRefreshRemoteIdentityMapResult, setShouldRegisterResultsInUnitOfWork, setShouldUseExclusiveConnection, setWasDefaultLockMode, shouldBuildNullForNullPk, shouldRefreshIdentityMapResult, shouldRefreshRemoteIdentityMapResult, shouldRegisterResultsInUnitOfWork, shouldUseExclusiveConnection, wasDefaultLockMode
 
Methods inherited from class org.eclipse.persistence.queries.ReadQuery
cacheQueryResults, cacheResult, clearQueryResults, doNotCacheQueryResults, getFetchSize, getFirstResult, getMaxRows, getQueryId, getQueryResults, getQueryResults, getQueryResults, getQueryResultsCachePolicy, getTemporaryCachedQueryResults, isReadQuery, prepareForExecution, remoteExecute, setFetchSize, setFirstResult, setMaxRows, setQueryId, setQueryResults, setQueryResultsCachePolicy, setTemporaryCachedQueryResults, shouldCacheQueryResults
 
Methods inherited from class org.eclipse.persistence.queries.DatabaseQuery
addArgument, addArgument, addArgument, addArgument, addArgumentByTypeName, addArgumentValue, addArgumentValues, addCall, addStatement, bindAllParameters, buildArgumentFields, buildSelectionCriteria, cacheStatement, cascadeAllParts, cascadeByMapping, cascadeOnlyDependentParts, cascadePrivateParts, checkForCustomQuery, checkPrepare, dontBindAllParameters, dontCacheStatement, dontCascadeParts, dontMaintainCache, extractRemoteResult, getAccessor, getAccessors, getArguments, getArgumentTypeNames, getArgumentTypes, getArgumentValues, getCall, getCascadePolicy, getDatasourceCall, getDatasourceCalls, getDefaultRedirector, getDescriptor, getDomainClassNounName, getDoNotRedirect, getEJBQLString, getExecutionSession, getFlushOnExecute, getHintString, getJPQLString, getMonitorName, getName, getNullableArguments, getParameterDelimiter, getParameterDelimiterChar, getPartitioningPolicy, getProperties, getProperty, getQueryMechanism, getQueryNounName, getQueryTimeout, getRedirector, getRedirectorForQuery, getSelectionCriteria, getSensorName, getSession, getSessionName, getShouldBindAllParameters, getSourceMapping, getSQLStatement, getSQLString, getSQLStrings, getTranslatedSQLString, getTranslatedSQLStrings, getTranslationRow, hasAccessor, hasArguments, hasNullableArguments, hasProperties, hasQueryMechanism, hasSessionName, ignoreBindAllParameters, ignoreCacheStatement, isCallQuery, isCascadeOfAggregateDelete, isCustomQueryUsed, isCustomSelectionQuery, isDataModifyQuery, isDataReadQuery, isDeleteAllQuery, isDeleteObjectQuery, isDirectReadQuery, isExecutionClone, isExpressionQuery, isInsertObjectQuery, isJPQLCallQuery, isModifyAllQuery, isModifyQuery, isNativeConnectionRequired, isObjectLevelModifyQuery, isPrepared, isReadAllQuery, isReadObjectQuery, isReportQuery, isSQLCallQuery, isUpdateAllQuery, isUpdateObjectQuery, isUserDefined, isUserDefinedSQLCall, isValueReadQuery, isWriteObjectQuery, maintainCache, prepareCall, redirectQuery, remoteExecute, removeProperty, replaceValueHoldersIn, resetMonitorName, retrieveBypassCache, rowFromArguments, setAccessor, setAccessors, setAllowNativeSQLQuery, setArguments, setArgumentTypeNames, setArgumentTypes, setArgumentValues, setCall, setCascadePolicy, setDatasourceCall, setDoNotRedirect, setExecutionSession, setFlushOnExecute, setHintString, setIsCustomQueryUsed, setIsExecutionClone, setIsNativeConnectionRequired, setIsUserDefined, setIsUserDefinedSQLCall, setJPQLString, setName, setNullableArguments, setParameterDelimiter, setPartitioningPolicy, setProperties, setProperty, setQueryMechanism, setQueryTimeout, setRedirector, setSession, setSessionName, setShouldBindAllParameters, setShouldBindAllParameters, setShouldCacheStatement, setShouldMaintainCache, setShouldPrepare, setShouldRetrieveBypassCache, setShouldStoreBypassCache, setShouldUseWrapperPolicy, setShouldValidateUpdateCallCacheUse, setSourceMapping, setSQLStatement, setSQLString, setTranslationRow, shouldAllowNativeSQLQuery, shouldBindAllParameters, shouldCacheStatement, shouldCascadeAllParts, shouldCascadeByMapping, shouldCascadeOnlyDependentParts, shouldCascadeParts, shouldCascadePrivateParts, shouldCloneCall, shouldIgnoreBindAllParameters, shouldIgnoreCacheStatement, shouldMaintainCache, shouldPrepare, shouldPrepare, shouldRetrieveBypassCache, shouldStoreBypassCache, shouldUseWrapperPolicy, shouldValidateUpdateCallCacheUse, storeBypassCache
 
Methods inherited from class java.lang.Object
finalize, getClass, notify, notifyAll, wait, wait, wait
 

Field Detail

READ

public static final java.lang.String READ
Names of the possible lock mode types, JPA 1.0 and 2.0

See Also:
Constant Field Values

WRITE

public static final java.lang.String WRITE
See Also:
Constant Field Values

NONE

public static final java.lang.String NONE
Names of the possible lock mode types, JPA 2.0 only

See Also:
Constant Field Values

PESSIMISTIC_

public static final java.lang.String PESSIMISTIC_
See Also:
Constant Field Values

PESSIMISTIC_READ

public static final java.lang.String PESSIMISTIC_READ
See Also:
Constant Field Values

PESSIMISTIC_WRITE

public static final java.lang.String PESSIMISTIC_WRITE
See Also:
Constant Field Values

PESSIMISTIC_FORCE_INCREMENT

public static final java.lang.String PESSIMISTIC_FORCE_INCREMENT
See Also:
Constant Field Values

OPTIMISTIC

public static final java.lang.String OPTIMISTIC
See Also:
Constant Field Values

OPTIMISTIC_FORCE_INCREMENT

public static final java.lang.String OPTIMISTIC_FORCE_INCREMENT
See Also:
Constant Field Values

defaultBuilder

protected ExpressionBuilder defaultBuilder
Provide a default builder so that it's easier to be consistent


cacheUsage

protected int cacheUsage
Allow for the cache usage to be specified to enable in-memory querying.


UseDescriptorSetting

public static final int UseDescriptorSetting
See Also:
Constant Field Values

DoNotCheckCache

public static final int DoNotCheckCache
See Also:
Constant Field Values

CheckCacheByExactPrimaryKey

public static final int CheckCacheByExactPrimaryKey
See Also:
Constant Field Values

CheckCacheByPrimaryKey

public static final int CheckCacheByPrimaryKey
See Also:
Constant Field Values

CheckCacheThenDatabase

public static final int CheckCacheThenDatabase
See Also:
Constant Field Values

CheckCacheOnly

public static final int CheckCacheOnly
See Also:
Constant Field Values

ConformResultsInUnitOfWork

public static final int ConformResultsInUnitOfWork
See Also:
Constant Field Values

additionalFields

protected java.util.List<java.lang.Object> additionalFields
Allow for additional fields to be selected, used for m-m batch reading. Can contain DatabaseField or Expression.


shouldIncludeData

protected boolean shouldIncludeData
Allow for a complex result to be return including the rows and objects, used for m-m batch reading.


isPrePrepared

protected boolean isPrePrepared
Allow a prePrepare stage to build the expression for EJBQL and QBE and resolve joining.


distinctState

protected short distinctState
Indicates if distinct should be used or not.


UNCOMPUTED_DISTINCT

public static final short UNCOMPUTED_DISTINCT
See Also:
Constant Field Values

USE_DISTINCT

public static final short USE_DISTINCT
See Also:
Constant Field Values

DONT_USE_DISTINCT

public static final short DONT_USE_DISTINCT
See Also:
Constant Field Values

inMemoryQueryIndirectionPolicy

protected int inMemoryQueryIndirectionPolicy
Used to determine behavior of indirection in in-memory querying and conforming.


fetchGroup

protected FetchGroup fetchGroup
FetchGroup specified on this query. When set this FetchGroup will override the fetchGroupName and the use of the descriptor's FetchGroupManager.getDefaultFetchGroup()


fetchGroupName

protected java.lang.String fetchGroupName
Name of FetchGroup stored in the FetchGroupManager of the reference class' descriptor or any of its parent descriptors.


shouldUseDefaultFetchGroup

protected boolean shouldUseDefaultFetchGroup
Flag to turn on/off the use of the default fetch group.


loadGroup

protected LoadGroup loadGroup
Specifies indirection that should be instantiated before returning result


entityFetchGroup

protected org.eclipse.persistence.internal.queries.EntityFetchGroup entityFetchGroup
Derived from fetchGroup, set on all objects returned by the query. Should neither be altered nor accessed directly, always through getEntityFetchGroup method: in case entityFetchGroup is null getEntityFetchGroup method may return defaultEntityFetchGroup cached on descriptor's FetchGroupManager.


nonFetchJoinAttributeExpressions

protected java.util.List<Expression> nonFetchJoinAttributeExpressions
Stores the non fetchjoin attributes, these are joins that will be represented in the where clause but not in the select.


partialAttributeExpressions

protected java.util.List<Expression> partialAttributeExpressions
Stores the partial attributes that have been added to this query


joinedAttributeManager

protected org.eclipse.persistence.internal.queries.JoinedAttributeManager joinedAttributeManager
Stores the helper object for dealing with joined attributes


batchFetchPolicy

protected BatchFetchPolicy batchFetchPolicy
Defines batch fetching configuration.


isReferenceClassLocked

protected java.lang.Boolean isReferenceClassLocked
PERF: Caches locking policy isReferenceClassLocked setting.


isResultSetOptimizedQuery

protected boolean isResultSetOptimizedQuery
PERF: Allow queries to build directly from the database result-set.


isReadOnly

protected boolean isReadOnly
PERF: Allow queries to be defined as read-only in unit of work execution.


shouldOuterJoinSubclasses

protected java.lang.Boolean shouldOuterJoinSubclasses
Define if an outer join should be used to read subclasses.


concreteSubclassCalls

protected java.util.Map<java.lang.Class,org.eclipse.persistence.internal.databaseaccess.DatabaseCall> concreteSubclassCalls
Allow concrete subclasses calls to be prepared and cached for inheritance queries.


concreteSubclassJoinedMappingIndexes

protected java.util.Map<java.lang.Class,java.util.Map<DatabaseMapping,java.lang.Object>> concreteSubclassJoinedMappingIndexes
Allow concrete subclasses joined mapping indexes to be prepared and cached for inheritance queries.


lockModeType

protected java.lang.String lockModeType
Used when specifying a lock mode for the query


waitTimeout

protected java.lang.Integer waitTimeout
waitTimeout has three possible setting: null, 0 and 1..N null: use the session.getPessimisticLockTimeoutDefault() if available. 0: issue a LOCK_NOWAIT 1..N: use this value to set the WAIT clause.


orderByExpressions

protected java.util.List<Expression> orderByExpressions
Used for ordering support.


shouldExtendPessimisticLockScope

protected boolean shouldExtendPessimisticLockScope
Indicates whether pessimistic lock should also be applied to relation tables (ManyToMany and OneToOne mappings), reference tables (DirectCollection and AggregateCollection mapping).


unionExpressions

protected java.util.List<Expression> unionExpressions
Allow a query's results to be unioned (UNION, INTERSECT, EXCEPT) with another query results.

Constructor Detail

ObjectLevelReadQuery

public ObjectLevelReadQuery()
INTERNAL: Initialize the state of the query

Method Detail

union

public void union(ReportQuery query)
PUBLIC: Union the query results with the other query.


intersect

public void intersect(ReportQuery query)
PUBLIC: Intersect the query results with the other query.


except

public void except(ReportQuery query)
PUBLIC: Except the query results with the other query.


addUnionExpression

public void addUnionExpression(Expression union)
PUBLIC: Add the union expression to the query. A union expression must be created with the query's expression builder and one of union/unionAll/intersect/intersectAll/except/exceptAll with a subquery expression.


getUnionExpressions

public java.util.List<Expression> getUnionExpressions()
Return any union expressions.


setUnionExpressions

public void setUnionExpressions(java.util.List<Expression> unionExpressions)
INTERNAL: Set any union expressions.


addDescendingOrdering

public void addDescendingOrdering(java.lang.String queryKeyName)
PUBLIC: Order the query results by the object's attribute or query key name.


addOrdering

public void addOrdering(Expression orderingExpression)
PUBLIC: Add the ordering expression. This allows for ordering across relationships or functions. Example: readAllQuery.addOrdering(expBuilder.get("address").get("city").toUpperCase().descending())


equals

public boolean equals(java.lang.Object object)
INTERNAL: Return if the query is equal to the other. This is used to allow dynamic expression query SQL to be cached.

Overrides:
equals in class java.lang.Object

hashCode

public int hashCode()
INTERNAL: Compute a consistent hash-code for the expression. This is used to allow dynamic expression's SQL to be cached.

Overrides:
hashCode in class java.lang.Object

isReadOnly

public boolean isReadOnly()
PUBLIC: Return if the query is read-only. This allows queries executed against a UnitOfWork to be read-only. This means the query will be executed against the Session, and the resulting objects will not be tracked for changes. The resulting objects are from the Session shared cache, and must not be modified.


setIsReadOnly

public void setIsReadOnly(boolean isReadOnly)
PUBLIC: Set the query to be read-only. This allows queries executed against a UnitOfWork to be read-only. This means the query will be executed against the Session, and the resulting objects will not be tracked for changes. The resulting objects are from the Session shared cache, and must not be modified.


setWaitTimeout

public void setWaitTimeout(java.lang.Integer waitTimeout)
PUBLIC: Sets that this a pessimistic wait locking query.

Fine Grained Locking: On execution the reference class and those of all joined attributes will be checked. If any of these have a PessimisticLockingPolicy set on their descriptor, they will be locked in a SELECT ... FOR UPDATE OF ... {NO WAIT}. Issues fewer locks and avoids setting the lock mode on each query.

Example: readAllQuery.setSelectionCriteria(employee.get("address").equal("Ottawa"));

See Also:
PessimisticLockingPolicy

clone

public java.lang.Object clone()
INTERNAL: Clone the query

Overrides:
clone in class ObjectBuildingQuery

deepClone

public java.lang.Object deepClone()
INTERNAL: Clone the query, including its selection criteria.

Normally selection criteria are not cloned here as they are cloned later on during prepare.

Overrides:
deepClone in class ObjectBuildingQuery

acquireLocks

public void acquireLocks()
PUBLIC: Set the query to lock, this will also turn refreshCache on.


acquireLocksWithoutWaiting

public void acquireLocksWithoutWaiting()
PUBLIC: Set the query to lock without waiting (blocking), this will also turn refreshCache on.


addAdditionalField

public void addAdditionalField(org.eclipse.persistence.internal.helper.DatabaseField field)
INTERNAL: Additional fields can be added to a query. This is used in m-m batch reading to bring back the key from the join table.


addAdditionalField

public void addAdditionalField(Expression fieldExpression)
INTERNAL: Additional fields can be added to a query. This is used in m-m batch reading to bring back the key from the join table.


addJoinedAttribute

public void addJoinedAttribute(java.lang.String attributeName)
PUBLIC: Specify the relationship attribute to be join fetched in this query. The query will join the object(s) being read with the attribute, this allows all of the data required for the object(s) to be read in a single query instead of (n) queries. This should be used when the application knows that it requires the part for all of the objects being read.

Note: This cannot be used for objects where it is possible not to have a part, as these objects will be omitted from the result set, unless an outer join is used through passing and expression using "getAllowingNull". To join fetch collection relationships use the addJoinedAttribute(Expression) using "anyOf" to "anyOfAllowingNone".

Example: query.addJoinedAttribute("address")

See Also:
addJoinedAttribute(Expression), addBatchReadAttribute(Expression)

addJoinedAttribute

public void addJoinedAttribute(Expression attributeExpression)
PUBLIC: Specify the attribute to be join fetched in this query. The query will join the object(s) being read with the specified attribute, this allows all of the data required for the object(s) to be read in a single query instead of (n) queries. This should be used when the application knows that it requires the part for all of the objects being read.

Note: This cannot be used for objects where it is possible not to have a part, as these objects will be omitted from the result set, unless an outer join is used through passing and expression using "getAllowingNull".

Example: The following will fetch along with Employee(s) "Jones" all projects they participate in along with teamLeaders and their addresses, teamMembers and their phones. query.setSelectionCriteria(query.getExpressionBuilder().get("lastName").equal("Jones")); Expression projects = query.getExpressionBuilder().anyOf("projects"); query.addJoinedAttribute(projects); Expression teamLeader = projects.get("teamLeader"); query.addJoinedAttribute(teamLeader); Expression teamLeaderAddress = teamLeader.getAllowingNull("address"); query.addJoinedAttribute(teamLeaderAddress); Expression teamMembers = projects.anyOf("teamMembers"); query.addJoinedAttribute(teamMembers); Expression teamMembersPhones = teamMembers.anyOfAllowingNone("phoneNumbers"); query.addJoinedAttribute(teamMembersPhones); Note that: the order is essential: an expression should be added before any expression derived from it; the object is built once - it won't be rebuilt if it to be read again as a joined attribute: in the example the query won't get phones for "Jones" - even though they are among teamMembers (for whom phones are read).


addNonFetchJoinedAttribute

public void addNonFetchJoinedAttribute(java.lang.String attributeName)
PUBLIC: Specify the relationship attribute to be join in this query. This allows the query results to be filtered based on the relationship join. The query will join the object(s) being read with the attribute. The difference between this and a joined fetched attribute is that it does not select the joined data nor populate the joined attribute, it is only used to filter the query results.

Example: query.addNonFetchJoinedAttribute("address")

See Also:
addNonFetchJoinedAttribute(Expression)

addNonFetchJoinedAttribute

public void addNonFetchJoinedAttribute(Expression attributeExpression)
PUBLIC: Specify the relationship attribute to be join in this query. This allows the query results to be filtered based on the relationship join. The query will join the object(s) being read with the attribute. The difference between this and a joined fetched attribute is that it does not select the joined data nor populate the joined attribute, it is only used to filter the query results.

Example: query.addNonFetchJoinedAttribute(query.getExpressionBuilder().get("teamLeader").get("address"))

See Also:
addNonFetchJoinedAttribute(Expression)

addNonFetchJoin

public void addNonFetchJoin(Expression target)
PUBLIC: Specify the object expression to be joined in this query. This allows the query results to be filtered based on the join to the object. The object should define an on clause that defines the join condition. This allows for two non-related objects to be joined.

Example: (select all employees that are a team leader)

 ExpressionBuilder project = new ExpressionBuilder(Project.class);
 ExpressionBuilder employee = new ExpressionBuilder(Employee.class);
 ReadAllQuery query = new ReadAllQuery(Employee.class, employee);
 query.addJoin(project.on(project.get("teamLeader").equal(employee)))
 


addPartialAttribute

public void addPartialAttribute(java.lang.String attributeName)
Deprecated. since EclipseLink 2.1, partial attributes replaced by fetch groups.

PUBLIC: Specify that only a subset of the class' attributes be selected in this query.

This allows for the query to be optimized through selecting less data.

Partial objects will be returned from the query, where the unspecified attributes will be left null. The primary key will always be selected to allow re-querying of the whole object.

Note: Because the object is not fully initialized it cannot be cached, and cannot be edited.

Note: You cannot have 2 partial attributes of the same type. You also cannot add a partial attribute which is of the same type as the class being queried.

Example: query.addPartialAttribute("firstName")

See Also:
addPartialAttribute(Expression), Example: FetchGroup fetchGroup = new FetchGroup(); fetchGroup.addAttribute("address.city"); query.setFetchGroup(fetchGroup);

addSelectionFieldsForJoinedExpression

protected void addSelectionFieldsForJoinedExpression(java.util.List fields,
                                                     boolean isCustomSQL,
                                                     Expression expression)
INTERNAL: The method adds to the passed input vector the fields or expressions corresponding to the passed join expression.


setAsOfClause

public void setAsOfClause(AsOfClause pastTime)
ADVANCED: Sets the query to execute as of the past time. Both the query execution and result will conform to the database as it existed in the past.

Equivalent to query.getSelectionCriteria().asOf(pastTime) called immediately before query execution.

An as of clause at the query level will override any clauses set at the expression level. Useful in cases where the selection criteria is not known in advance, such as for query by example or primary key (selection object), or where you do not need to cache the result (report query).

Ideally an as of clause at the session level is superior as query results can then be cached. You must set setShouldMaintainCache(false)

To query all joined/batched attributes as of the same time set this.cascadeAllParts().

Throws:
QueryException - (at execution time) unless setShouldMaintainCache(false) is set. If some more recent data were in the cache, this would be returned instead, and both the cache and query result would become inconsistent.
See Also:
hasAsOfClause(), Session.acquireHistoricalSession(org.eclipse.persistence.history.AsOfClause), Expression.asOf(org.eclipse.persistence.history.AsOfClause)
Since:
OracleAS TopLink 10g (10.0.3)

addPartialAttribute

public void addPartialAttribute(Expression attributeExpression)
Deprecated. since EclipseLink 2.1, partial attributes replaced by fetch groups.

PUBLIC: Specify that only a subset of the class' attributes be selected in this query.

This allows for the query to be optimized through selecting less data.

Partial objects will be returned from the query, where the unspecified attributes will be left null. The primary key will always be selected to allow re-querying of the whole object.

Note: Because the object is not fully initialized it cannot be cached, and cannot be edited.

Note: You cannot have 2 partial attributes of the same type. You also cannot add a partial attribute which is of the same type as the class being queried.

Example: query.addPartialAttribute(query.getExpressionBuilder().get("address").get("city"))

See Also:
Example: FetchGroup fetchGroup = new FetchGroup(); fetchGroup.addAttribute("address.city"); query.setFetchGroup(fetchGroup);

buildObject

public java.lang.Object buildObject(org.eclipse.persistence.internal.sessions.AbstractRecord row)
INTERNAL: Used to build the object, and register it if in the context of a unit of work.

Overrides:
buildObject in class ReadQuery

checkCacheOnly

public void checkCacheOnly()
PUBLIC: The cache will checked completely, if the object is not found null will be returned or an error if the query is too complex. Queries can be configured to use the cache at several levels. Other caching option are available.

See Also:
setCacheUsage(int)

checkDescriptor

public void checkDescriptor(org.eclipse.persistence.internal.sessions.AbstractSession session)
                     throws QueryException
INTERNAL: Ensure that the descriptor has been set.

Overrides:
checkDescriptor in class DatabaseQuery
Throws:
QueryException

checkEarlyReturnLocal

protected abstract java.lang.Object checkEarlyReturnLocal(org.eclipse.persistence.internal.sessions.AbstractSession session,
                                                          org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
INTERNAL: Contains the body of the check early return call, implemented by subclasses.


checkEarlyReturn

public java.lang.Object checkEarlyReturn(org.eclipse.persistence.internal.sessions.AbstractSession session,
                                         org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
INTERNAL: Check to see if this query already knows the return value without performing any further work.

Overrides:
checkEarlyReturn in class DatabaseQuery

checkPrepare

public void checkPrepare(org.eclipse.persistence.internal.sessions.AbstractSession session,
                         org.eclipse.persistence.internal.sessions.AbstractRecord translationRow,
                         boolean force)
INTERNAL: Check to see if this query needs to be prepare and prepare it. The prepare is done on the original query to ensure that the work is not repeated.

Overrides:
checkPrepare in class DatabaseQuery

checkPrePrepare

protected void checkPrePrepare(org.eclipse.persistence.internal.sessions.AbstractSession session)
INTERNAL: ObjectLevelReadQueries now have an explicit pre-prepare stage, which is for checking for pessimistic locking, and computing any joined attributes declared on the descriptor.


changeDescriptor

public void changeDescriptor(org.eclipse.persistence.internal.sessions.AbstractSession theSession)
INTERNAL: The reference class has been changed, need to reset the descriptor. Null out the current descriptor and call checkDescriptor Added Feb 27, 2001 JED for EJBQL feature


conformIndividualResult

protected java.lang.Object conformIndividualResult(java.lang.Object clone,
                                                   org.eclipse.persistence.internal.sessions.UnitOfWorkImpl unitOfWork,
                                                   org.eclipse.persistence.internal.sessions.AbstractRecord arguments,
                                                   Expression selectionCriteriaClone,
                                                   java.util.Map alreadyReturned)
INTERNAL: Conforms and registers an individual result. This instance could be one of the elements returned from a read all query, the result of a Read Object query, or an element read from a cursor.

A result needs to be registered before it can be conformed, so registerIndividualResult is called here.

Conforming on a result from the database is lenient. Since the object matched the query on the database we assume it matches here unless we can determine for sure that it was changed in this UnitOfWork not to conform.

Parameters:
result - may be an original, or a raw database row
arguments - the parameters this query was executed with
selectionCriteriaClone - the expression to conform to. If was a selection object or key, null (which all conform to) is used
alreadyReturned - a hashtable of objects already found by scanning the UnitOfWork cache for conforming instances. Prevents duplicates.
buildDirectlyFromRows - whether result is an original or a raw database row
Returns:
a clone, or null if result does not conform.

conformResultsInUnitOfWork

public void conformResultsInUnitOfWork()
PUBLIC: The cache will checked completely, if the object is not found the database will be queried, and the database result will be verified with what is in the cache and/or unit of work including new objects. This can lead to poor performance so it is recommended that only the database be queried in most cases. Queries can be configured to use the cache at several levels. Other caching option are available.

See Also:
setCacheUsage(int)

dontAcquireLocks

public void dontAcquireLocks()
PUBLIC: Set the query not to lock.


dontCheckCache

public void dontCheckCache()
PUBLIC: This can be used to explicitly disable the cache hit. The cache hit may not be desired in some cases, such as stored procedures that accept the primary key but do not query on it.


dontRefreshIdentityMapResult

public void dontRefreshIdentityMapResult()
PUBLIC: When unset means perform read normally and dont do refresh.

Overrides:
dontRefreshIdentityMapResult in class ObjectBuildingQuery

dontRefreshRemoteIdentityMapResult

public void dontRefreshRemoteIdentityMapResult()
PUBLIC: When unset means perform read normally and dont do refresh.

Overrides:
dontRefreshRemoteIdentityMapResult in class ObjectBuildingQuery

dontUseDistinct

public void dontUseDistinct()
ADVANCED: If a distinct has been set the DISTINCT clause will be printed. This is used internally by EclipseLink for batch reading but may also be used directly for advanced queries or report queries.


prepareOutsideUnitOfWork

public DatabaseQuery prepareOutsideUnitOfWork(org.eclipse.persistence.internal.sessions.AbstractSession session)
INTERNAL: There is a very special case where a query may be a bean-level pessimistic locking query.

If that is so, only queries executed inside of a UnitOfWork should have a locking clause. In the extremely rare case that we execute a locking query outside of a UnitOfWork, must disable locking so that we do not get a fetch out of sequence error.


execute

public java.lang.Object execute(org.eclipse.persistence.internal.sessions.AbstractSession session,
                                org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
                         throws DatabaseException,
                                OptimisticLockException
INTERNAL: Execute the query. If there are objects in the cache return the results of the cache lookup.

Overrides:
execute in class DatabaseQuery
Parameters:
session - - the session in which the receiver will be executed.
Returns:
An object, the result of executing the query.
Throws:
DatabaseException - - an error has occurred on the database.
OptimisticLockException - - an error has occurred using the optimistic lock feature.

executeDatabaseQuery

public java.lang.Object executeDatabaseQuery()
                                      throws DatabaseException
INTERNAL: Executes the prepared query on the datastore.

Specified by:
executeDatabaseQuery in class DatabaseQuery
Returns:
- the result of executing the query.
Throws:
DatabaseException - - an error has occurred on the database.

executeObjectLevelReadQuery

protected abstract java.lang.Object executeObjectLevelReadQuery()
                                                         throws DatabaseException
Executes the prepared query on the datastore.

Throws:
DatabaseException

executeObjectLevelReadQueryFromResultSet

protected abstract java.lang.Object executeObjectLevelReadQueryFromResultSet()
                                                                      throws DatabaseException
Executes the prepared query on the datastore.

Throws:
DatabaseException

executeInUnitOfWork

public java.lang.Object executeInUnitOfWork(org.eclipse.persistence.internal.sessions.UnitOfWorkImpl unitOfWork,
                                            org.eclipse.persistence.internal.sessions.AbstractRecord translationRow)
                                     throws DatabaseException,
                                            OptimisticLockException
INTERNAL: Execute the query in the unit of work. This allows any pre-execute checks to be done for unit of work queries.

Overrides:
executeInUnitOfWork in class DatabaseQuery
Parameters:
unitOfWork - - the session in which the receiver will be executed.
translationRow - - the arguments
Returns:
An object, the result of executing the query.
Throws:
DatabaseException - - an error has occurred on the database.
OptimisticLockException - - an error has occurred using the optimistic lock feature.

getAdditionalFields

public java.util.List<java.lang.Object> getAdditionalFields()
INTERNAL: Additional fields can be added to a query. This is used in m-m batch reading to bring back the key from the join table.


getAsOfClause

public AsOfClause getAsOfClause()
ADVANCED: Answers the past time this query is as of.

Returns:
An immutable object representation of the past time. null if no clause set, AsOfClause.NO_CLAUSE if clause explicitly set to null.
See Also:
AsOfClause, setAsOfClause(org.eclipse.persistence.history.AsOfClause), hasAsOfClause()

getCacheUsage

public int getCacheUsage()
PUBLIC: Return the cache usage. By default only primary key read object queries will first check the cache before accessing the database. Any query can be configure to query against the cache completely, by key or ignore the cache check.

Valid values are:


getDistinctState

public short getDistinctState()
ADVANCED: If a distinct has been set the DISTINCT clause will be printed. This is used internally by EclipseLink for batch reading but may also be used directly for advanced queries or report queries.


getExampleObject

public java.lang.Object getExampleObject()
PUBLIC: This method returns the current example object. The "example" object is an actual domain object, provided by the client, from which an expression is generated. This expression is used for a query of all objects from the same class, that match the attribute values of the "example" object.


getExpressionBuilder

public ExpressionBuilder getExpressionBuilder()
REQUIRED: Get the expression builder which should be used for this query. This expression builder should be used to build all expressions used by this query.


setExpressionBuilder

public void setExpressionBuilder(ExpressionBuilder builder)
INTERNAL Sets the default expression builder for this query.


getInMemoryQueryIndirectionPolicyState

public int getInMemoryQueryIndirectionPolicyState()
PUBLIC: Returns the InMemoryQueryIndirectionPolicy for this query


getInMemoryQueryIndirectionPolicy

public InMemoryQueryIndirectionPolicy getInMemoryQueryIndirectionPolicy()
PUBLIC: Returns the InMemoryQueryIndirectionPolicy for this query


getJoinedAttributeManager

public org.eclipse.persistence.internal.queries.JoinedAttributeManager getJoinedAttributeManager()
INTERNAL: Return join manager responsible for managing all aspects of joining for the query. Queries without joining should not have a joinedAttributeManager.


setJoinedAttributeManager

public void setJoinedAttributeManager(org.eclipse.persistence.internal.queries.JoinedAttributeManager joinedAttributeManager)
INTERNAL: Set join manager responsible for managing all aspects of joining for the query.


hasJoining

public boolean hasJoining()
INTERNAL: Return if any attributes are joined. To avoid the initialization of the JoinedAttributeManager this should be first checked before accessing.


getJoinedAttributeExpressions

public java.util.List getJoinedAttributeExpressions()
INTERNAL: Convenience method for project mapping.


setJoinedAttributeExpressions

public void setJoinedAttributeExpressions(java.util.List expressions)
INTERNAL: Convenience method for project mapping.


getOrderByExpressions

public java.util.List<Expression> getOrderByExpressions()
INTERNAL: Return the order expressions for the query.


setOrderByExpressions

public void setOrderByExpressions(java.util.List<Expression> orderByExpressions)
INTERNAL: Set the order expressions for the query.


hasOrderByExpressions

public boolean hasOrderByExpressions()
INTERNAL: The order bys are lazy initialized to conserve space.


hasUnionExpressions

public boolean hasUnionExpressions()
INTERNAL: The unions are lazy initialized to conserve space.


shouldFilterDuplicates

public boolean shouldFilterDuplicates()
PUBLIC: Return if duplicate rows should be filter when using 1-m joining.


setShouldFilterDuplicates

public void setShouldFilterDuplicates(boolean shouldFilterDuplicates)
PUBLIC: Set if duplicate rows should be filter when using 1-m joining.


getLockingClause

public org.eclipse.persistence.internal.expressions.ForUpdateClause getLockingClause()
INTERNAL: It is not exactly as simple as a query being either locking or not. Any combination of the reference class object and joined attributes may be locked.


getNonFetchJoinAttributeExpressions

public java.util.List<Expression> getNonFetchJoinAttributeExpressions()
INTERNAL: Return the attributes that must be joined, but not fetched, that is, do not trigger the value holder.


getPartialAttributeExpressions

public java.util.List<Expression> getPartialAttributeExpressions()
INTERNAL: Return the partial attributes to select.


getQueryByExamplePolicy

public QueryByExamplePolicy getQueryByExamplePolicy()
PUBLIC: When using Query By Example, an instance of QueryByExamplePolicy is used to customize the query. The policy is useful when special operations are to be used for comparisons (notEqual, lessThan, greaterThan, like etc.), when a certain value is to be ignored, or when dealing with nulls.


getReferenceClass

public java.lang.Class getReferenceClass()
PUBLIC: Return the reference class of the query.

Overrides:
getReferenceClass in class ObjectBuildingQuery

getReferenceClassName

public java.lang.String getReferenceClassName()
INTERNAL: Return the reference class of the query.

Overrides:
getReferenceClassName in class ObjectBuildingQuery

hasAsOfClause

public boolean hasAsOfClause()
PUBLIC: Answers if the domain objects are to be read as of a past time.

See Also:
getAsOfClause()

hasNonFetchJoinedAttributeExpressions

public boolean hasNonFetchJoinedAttributeExpressions()
INTERNAL: Return the attributes that must be joined.


hasPartialAttributeExpressions

public boolean hasPartialAttributeExpressions()
INTERNAL: Return if partial attributes.

Overrides:
hasPartialAttributeExpressions in class ObjectBuildingQuery

hasAdditionalFields

public boolean hasAdditionalFields()
INTERNAL: Return if additional field.


getPartialAttributeSelectionFields

public java.util.Vector getPartialAttributeSelectionFields(boolean isCustomSQL)
INTERNAL: Return the fields required in the select clause, for patial attribute reading.


getFetchGroupNonNestedFieldsSet

public java.util.Set<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupNonNestedFieldsSet()
INTERNAL: Return the set of fields required in the select clause, for fetch group reading.


getFetchGroupNonNestedFieldsSet

public java.util.Set<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupNonNestedFieldsSet(DatabaseMapping nestedMapping)
INTERNAL: Return the set of fields required in the select clause, for fetch group reading.


getFetchGroupSelectionFields

public java.util.List<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupSelectionFields()
INTERNAL: Return the fields required in the select clause, for fetch group reading.


getFetchGroupSelectionFields

protected java.util.List<org.eclipse.persistence.internal.helper.DatabaseField> getFetchGroupSelectionFields(DatabaseMapping nestedMapping)
INTERNAL: Return the fields required in the select clause, for fetch group reading. Top level (not nested) passes null instead of nestedMapping.


addJoinSelectionFields

public void addJoinSelectionFields(java.util.Vector fields,
                                   boolean isCustomSQL)
INTERNAL: The method adds to the passed input vector the fields or expressions corresponding to the joins.


getSelectionFields

public java.util.Vector getSelectionFields()
INTERNAL: Return the fields selected by the query. This includes the partial or joined fields. This is only used for custom SQL executions.


getWaitTimeout

public java.lang.Integer getWaitTimeout()
PUBLIC: Return the WAIT timeout value of pessimistic locking query.


initializeDefaultBuilder

protected void initializeDefaultBuilder()
Initialize the expression builder which should be used for this query. If there is a where clause, use its expression builder, otherwise generate one and cache it. This helps avoid unnecessary rebuilds.


isDistinctComputed

public boolean isDistinctComputed()
INTERNAL: return true if this query has computed its distinct value already


isLockQuery

public boolean isLockQuery()
PUBLIC: Answers if the query lock mode is known to be LOCK or LOCK_NOWAIT. In the case of DEFAULT_LOCK_MODE and the query reference class being a CMP entity bean, at execution time LOCK, LOCK_NOWAIT, or NO_LOCK will be decided.

If a single joined attribute was configured for pessimistic locking then this will return true (after first execution) as the SQL contained a FOR UPDATE OF clause.

Overrides:
isLockQuery in class ObjectBuildingQuery

isLockQuery

public boolean isLockQuery(Session session)
ADVANCED: Answers if this query will issue any pessimistic locks.

If the lock mode is not known (DEFAULT_LOCK_MODE / descriptor specified fine-grained locking) the lock mode will be determined now, to be either LOCK, LOCK_NOWAIT, or NO_LOCK.

See Also:
isLockQuery()

isObjectLevelReadQuery

public boolean isObjectLevelReadQuery()
PUBLIC: Return if this is an object level read query.

Overrides:
isObjectLevelReadQuery in class DatabaseQuery

isPartialAttribute

public boolean isPartialAttribute(java.lang.String attributeName)
INTERNAL: Return if partial attribute.


shouldExtendPessimisticLockScope

public boolean shouldExtendPessimisticLockScope()
INTERNAL: Indicates whether pessimistic lock should also be applied to relation tables (ManyToMany and OneToOne mappings), reference tables (DirectCollection and AggregateCollection mapping).


isPrePrepared

protected boolean isPrePrepared()
PUBLIC: Queries prepare common stated in themselves.


setIsPrePrepared

public void setIsPrePrepared(boolean isPrePrepared)
INTERNAL: If changes are made to the query that affect the derived SQL or Call parameters the query needs to be prepared again.

Automatically called internally.

The early phase of preparation is to check if this is a pessimistic locking query.


setShouldExtendPessimisticLockScope

public void setShouldExtendPessimisticLockScope(boolean isExtended)
INTERNAL: Indicates whether pessimistic lock should also be applied to relation tables (ManyToMany and OneToOne mappings), reference tables (DirectCollection and AggregateCollection mapping).


setIsPrepared

public void setIsPrepared(boolean isPrepared)
INTERNAL: Clear cached flags when un-preparing.

Overrides:
setIsPrepared in class DatabaseQuery

setIsPreparedKeepingSubclassData

protected void setIsPreparedKeepingSubclassData(boolean isPrepared)
INTERNAL: Clear cached flags when un-preparing. The method always keeps concrete subclass data (unlike setIsPrepared(false)).


prepare

protected void prepare()
                throws QueryException
INTERNAL: Prepare the receiver for execution in a session.

Overrides:
prepare in class ReadQuery
Throws:
QueryException

prepareFromCachedQuery

protected boolean prepareFromCachedQuery()
INTERNAL: Check if the query is cached and prepare from it. Return true if the query was cached.


copyFromQuery

public void copyFromQuery(DatabaseQuery query)
INTERNAL: Copy all setting from the query. This is used to morph queries from one type to the other. By default this calls prepareFromQuery, but additional properties may be required to be copied as prepareFromQuery only copies properties that affect the SQL.

Overrides:
copyFromQuery in class ObjectBuildingQuery

prepareFromQuery

public void prepareFromQuery(DatabaseQuery query)
INTERNAL: Prepare the query from the prepared query. This allows a dynamic query to prepare itself directly from a prepared query instance. This is used in the EJBQL parse cache to allow preparsed queries to be used to prepare dynamic queries. This only copies over properties that are configured through EJBQL.

Overrides:
prepareFromQuery in class ObjectBuildingQuery

prepareFetchGroup

public void prepareFetchGroup()
                       throws QueryException
INTERNAL: Add mandatory attributes to fetch group, create entityFetchGroup.

Throws:
QueryException

prePrepare

protected void prePrepare()
                   throws QueryException
INTERNAL: Prepare the receiver for execution in a session.

Throws:
QueryException

prepareQuery

protected void prepareQuery()
                     throws QueryException
INTERNAL: Prepare the receiver for execution in a session.

Throws:
QueryException

prepareForRemoteExecution

protected void prepareForRemoteExecution()
                                  throws QueryException
INTERNAL: Prepare the receiver for execution in a session.

Overrides:
prepareForRemoteExecution in class DatabaseQuery
Throws:
QueryException

refreshIdentityMapResult

public void refreshIdentityMapResult()
PUBLIC: Refresh the attributes of the object(s) resulting from the query. If cascading is used the private parts of the objects will also be refreshed.

Overrides:
refreshIdentityMapResult in class ObjectBuildingQuery

refreshRemoteIdentityMapResult

public void refreshRemoteIdentityMapResult()
PUBLIC: Refresh the attributes of the object(s) resulting from the query. If cascading is used the private parts of the objects will also be refreshed.

Overrides:
refreshRemoteIdentityMapResult in class ObjectBuildingQuery

registerResultInUnitOfWork

public abstract java.lang.Object registerResultInUnitOfWork(java.lang.Object result,
                                                            org.eclipse.persistence.internal.sessions.UnitOfWorkImpl unitOfWork,
                                                            org.eclipse.persistence.internal.sessions.AbstractRecord arguments,
                                                            boolean buildDirectlyFromRows)
INTERNAL: All objects queried via a UnitOfWork get registered here. If the query went to the database.

Involves registering the query result individually and in totality, and hence refreshing / conforming is done here.

Parameters:
result - may be collection (read all) or an object (read one), or even a cursor. If in transaction the shared cache will be bypassed, meaning the result may not be originals from the parent but raw database rows.
unitOfWork - the unitOfWork the result is being registered in.
arguments - the original arguments/parameters passed to the query execution. Used by conforming
buildDirectlyFromRows - If in transaction must construct a registered result from raw database rows.
Returns:
the final (conformed, refreshed, wrapped) UnitOfWork query result

resetDistinct

public void resetDistinct()
ADVANCED: If a distinct has been set the DISTINCT clause will be printed. This is used internally by TopLink for batch reading but may also be used directly for advanced queries or report queries.


setAdditionalFields

public void setAdditionalFields(java.util.List<java.lang.Object> additionalFields)
INTERNAL: Additional fields can be added to a query. This is used in m-m batch reading to bring back the key from the join table.


shouldCheckCache

public boolean shouldCheckCache()
PUBLIC: Return if the cache should be checked.


setCacheUsage

public void setCacheUsage(int cacheUsage)
PUBLIC: Set the cache usage. By default only primary key read object queries will first check the cache before accessing the database. Any query can be configure to query against the cache completely, by key or ignore the cache check.

Valid values are:


setDescriptor

public void setDescriptor(ClassDescriptor descriptor)
INTERNAL: Set the descriptor for the query.

Overrides:
setDescriptor in class DatabaseQuery

setDistinctState

public void setDistinctState(short distinctState)
ADVANCED: If a distinct has been set the DISTINCT clause will be printed. This is used internally by TopLink for batch reading but may also be used directly for advanced queries or report queries.


setExampleObject

public void setExampleObject(java.lang.Object newExampleObject)
PUBLIC: Set the example object of the query to be the newExampleObject. The example object is used for Query By Example. When doing a Query By Example, an instance of the desired object is created, and the fields are filled with the values that are required in the result set. From these values the corresponding expression is built by EclipseLink, and the query is executed, returning the set of results.

If a query already has a selection criteria this criteria and the generated query by example criteria will be conjuncted.

Once a query is executed you must make an explicit call to setExampleObject if the example object is changed, so the query will know to prepare itself again.

There is a caution to setting both a selection criteria and an example object: Only in this case if you set the example object again after execution you must then also reset the selection criteria. (This is because after execution the original criteria and Query By Example criteria were fused together, and the former cannot be easily recovered from the now invalid result).


setInMemoryQueryIndirectionPolicy

public void setInMemoryQueryIndirectionPolicy(InMemoryQueryIndirectionPolicy inMemoryQueryIndirectionPolicy)
PUBLIC: Set the InMemoryQueryIndirectionPolicy for this query.


setInMemoryQueryIndirectionPolicyState

public void setInMemoryQueryIndirectionPolicyState(int inMemoryQueryIndirectionPolicy)
PUBLIC: Set the InMemoryQueryIndirectionPolicy for this query.


setLockMode

public void setLockMode(short lockMode)
PUBLIC: Sets whether this is a pessimistically locking query.

Fine Grained Locking: On execution the reference class and those of all joined attributes will be checked. If any of these have a PessimisticLockingPolicy set on their descriptor, they will be locked in a SELECT ... FOR UPDATE OF ... {NO WAIT}. Issues fewer locks and avoids setting the lock mode on each query.

Example:readAllQuery.setSelectionCriteria(employee.get("address").equal("Ottawa"));

Overrides:
setLockMode in class ObjectBuildingQuery
See Also:
PessimisticLockingPolicy

setLockModeType

public boolean setLockModeType(java.lang.String lockModeType,
                               org.eclipse.persistence.internal.sessions.AbstractSession session)
INTERNAL: Sets a javax.persistence.LockModeType to used with this queries execution. The valid types are: - WRITE - READ - OPTIMISTIC - OPTIMISTIC_FORCE_INCREMENT - PESSIMISTIC_READ - PESSIMISTIC_WRITE - PESSIMISTIC_FORCE_INCREMENT - NONE Setting a null type will do nothing.

Returns:
returns a failure flag indicating that we were UNABLE to set the lock mode because of validation. Callers to this method should check the return value and throw the necessary exception.

setNonFetchJoinAttributeExpressions

public void setNonFetchJoinAttributeExpressions(java.util.List<Expression> nonFetchJoinExpressions)
INTERNAL: Return the attributes that must be joined, but not fetched, that is, do not trigger the value holder.


setLockingClause

public void setLockingClause(org.eclipse.persistence.internal.expressions.ForUpdateClause clause)
INTERNAL: The locking clause contains a list of expressions representing which objects are to be locked by the query.

Use for even finer grained control over what is and is not locked by a particular query.


setPartialAttributeExpressions

public void setPartialAttributeExpressions(java.util.List<Expression> partialAttributeExpressions)
INTERNAL: Set the partial attributes to select.


setEJBQLString

public void setEJBQLString(java.lang.String ejbqlString)
Description copied from class: DatabaseQuery
PUBLIC: Set the EJBQL string of the query. If arguments are required in the string they will be preceded by "?" then the argument number.

Overrides:
setEJBQLString in class DatabaseQuery

setQueryByExamplePolicy

public void setQueryByExamplePolicy(QueryByExamplePolicy queryByExamplePolicy)
PUBLIC: The QueryByExamplePolicy, is a useful to customize the query when Query By Example is used. The policy will control what attributes should, or should not be included in the query. When dealing with nulls, using special operations (notEqual, lessThan, like, etc.) for comparison, or choosing to include certain attributes at all times, it is useful to modify the policy accordingly.

Once a query is executed you must make an explicit call to setQueryByExamplePolicy when changing the policy, so the query will know to prepare itself again.

There is a caution to setting both a selection criteria and an example object: If you set the policy after execution you must also reset the selection criteria. (This is because after execution the original criteria and Query By Example criteria are fused together, and the former cannot be easily recovered).


setReferenceClass

public void setReferenceClass(java.lang.Class aClass)
REQUIRED: Set the reference class for the query.

Overrides:
setReferenceClass in class ObjectBuildingQuery

setReferenceClassName

public void setReferenceClassName(java.lang.String aClass)
INTERNAL: Set the reference class for the query.

Overrides:
setReferenceClassName in class ObjectBuildingQuery

setSelectionCriteria

public void setSelectionCriteria(Expression expression)
PUBLIC: Set the Expression/where clause of the query. The expression should be defined using the query's ExpressionBuilder.

Overrides:
setSelectionCriteria in class DatabaseQuery

setShouldIncludeData

public void setShouldIncludeData(boolean shouldIncludeData)
INTERNAL: Set if the rows for the result of the query should also be returned using a complex query result.

See Also:
ComplexQueryResult

shouldCheckCacheOnly

public boolean shouldCheckCacheOnly()
PUBLIC: Return if cache should be checked.


shouldCheckDescriptorForCacheUsage

public boolean shouldCheckDescriptorForCacheUsage()
PUBLIC: Return whether the descriptor's disableCacheHits setting should be checked prior to querying the cache.


shouldConformResultsInUnitOfWork

public boolean shouldConformResultsInUnitOfWork()
PUBLIC: Should the results will be checked against the changes within the unit of work and object no longer matching or deleted will be remove, matching new objects will also be added..


shouldDistinctBeUsed

public boolean shouldDistinctBeUsed()
INTERNAL: return true if this query should use a distinct


shouldIncludeData

public boolean shouldIncludeData()
INTERNAL: Return if the rows for the result of the query should also be returned using a complex query result.

See Also:
ComplexQueryResult

shouldOuterJoinSubclasses

public boolean shouldOuterJoinSubclasses()
PUBLIC: Return if an outer join should be used to read subclasses. By default a separate query is done for each subclass when querying for a root or branch inheritance class that has subclasses that span multiple tables.


setShouldOuterJoinSubclasses

public void setShouldOuterJoinSubclasses(boolean shouldOuterJoinSubclasses)
PUBLIC: Set if an outer join should be used to read subclasses. By default a separate query is done for each subclass when querying for a root or branch inheritance class that has subclasses that span multiple tables.


shouldReadAllMappings

public boolean shouldReadAllMappings()
INTERNAL: Return if this is a full object query, not partial nor fetch group.

Overrides:
shouldReadAllMappings in class ObjectBuildingQuery

shouldReadMapping

public boolean shouldReadMapping(DatabaseMapping mapping)
INTERNAL: Check if the mapping is part of the partial attributes.

Overrides:
shouldReadMapping in class ObjectBuildingQuery

useDistinct

public void useDistinct()
ADVANCED: If a distinct has been set the DISTINCT clause will be printed. This is used internally by EclipseLink for batch reading but may also be used directly for advanced queries or report queries.


isClonePessimisticLocked

public boolean isClonePessimisticLocked(java.lang.Object clone,
                                        org.eclipse.persistence.internal.sessions.UnitOfWorkImpl uow)
INTERNAL: Helper method that checks if clone has been locked with uow.

Overrides:
isClonePessimisticLocked in class ObjectBuildingQuery

isReferenceClassLocked

protected boolean isReferenceClassLocked()
INTERNAL: Cache the locking policy isReferenceClassLocked check.


recordCloneForPessimisticLocking

public void recordCloneForPessimisticLocking(java.lang.Object clone,
                                             org.eclipse.persistence.internal.sessions.UnitOfWorkImpl uow)
INTERNAL: Helper method that records clone with uow if query is pessimistic locking.

Overrides:
recordCloneForPessimisticLocking in class ObjectBuildingQuery

isResultSetOptimizedQuery

public boolean isResultSetOptimizedQuery()
ADVANCED: Return if the query should be optimized to build directly from the result set. This optimization follows an optimized path and can only be used for, singleton primary key, direct mapped, simple type, no inheritance, uow isolated objects.


setIsResultSetOptimizedQuery

public void setIsResultSetOptimizedQuery(boolean isResultSetOptimizedQuery)
ADVANCED: Set if the query should be optimized to build directly from the result set. This optimization follows an optimized path and can only be used for, singleton primary key, direct mapped, simple type, no inheritance, uow isolated objects.


isDefaultLock

public boolean isDefaultLock()
INTERNAL: Helper method to determine the default mode. If true and query has a pessimistic locking policy, locking will be configured according to the pessimistic locking policy.

Overrides:
isDefaultLock in class ObjectBuildingQuery

isDefaultPropertiesQuery

public boolean isDefaultPropertiesQuery()
INTERNAL: Return true if the query uses default properties. This is used to determine if this query is cacheable. i.e. does not use any properties that may conflict with another query with the same JPQL or selection criteria.

Overrides:
isDefaultPropertiesQuery in class ReadQuery

hasDefaultBuilder

public boolean hasDefaultBuilder()
INTERNAL: Checks to see if a builder has been set on the query.


hasFetchGroup

public boolean hasFetchGroup()
Return if a fetch group is set in the query.


getFetchGroup

public FetchGroup getFetchGroup()
Return the fetch group set in the query. If a fetch group is not explicitly set in the query, default fetch group optionally defined in the descriptor would be used, unless the user explicitly calls query.setShouldUseDefaultFetchGroup(false). Note that the returned fetchGroup may be updated during preProcess.

See Also:
for named and default FetchGroup lookup.

getLoadGroup

public LoadGroup getLoadGroup()
Return the load group set in the query.


getExecutionFetchGroup

public FetchGroup getExecutionFetchGroup()
INTERNAL: Returns FetchGroup that will be applied to the query. Note that the returned fetchGroup may be updated during preProcess.

Overrides:
getExecutionFetchGroup in class ObjectBuildingQuery

getEntityFetchGroup

public org.eclipse.persistence.internal.queries.EntityFetchGroup getEntityFetchGroup()
INTERNAL: Returns EntityFetchGroup that will be applied to objects returned by the query. Should not be called before preProcess - may not yet exist.

Overrides:
getEntityFetchGroup in class ObjectBuildingQuery

hasExecutionFetchGroup

public boolean hasExecutionFetchGroup()
INTERNAL: Indicates whether a FetchGroup will be applied to the query.

Overrides:
hasExecutionFetchGroup in class ObjectBuildingQuery

setFetchGroup

public void setFetchGroup(FetchGroup newFetchGroup)
Set a dynamic (use case) fetch group to the query.


setFetchGroupName

public void setFetchGroupName(java.lang.String groupName)
Set a descriptor-level pre-defined named fetch group to the query.


setLoadGroup

public void setLoadGroup(LoadGroup loadGroup)
Set a load group to the query.


getFetchGroupName

public java.lang.String getFetchGroupName()
Return the fetch group name set in the query.


shouldUseDefaultFetchGroup

public boolean shouldUseDefaultFetchGroup()
Return false if the query does not use the default fetch group defined in the descriptor level.


setShouldUseDefaultFetchGroup

public void setShouldUseDefaultFetchGroup(boolean shouldUseDefaultFetchGroup)
Set false if the user does not want to use the default fetch group defined in the descriptor level.


getConcreteSubclassCalls

public java.util.Map<java.lang.Class,org.eclipse.persistence.internal.databaseaccess.DatabaseCall> getConcreteSubclassCalls()
INTERNAL: Return the cache of concrete subclass calls. This allow concrete subclasses calls to be prepared and cached for inheritance queries.


getConcreteSubclassJoinedMappingIndexes

public java.util.Map<java.lang.Class,java.util.Map<DatabaseMapping,java.lang.Object>> getConcreteSubclassJoinedMappingIndexes()
INTERNAL: Return the cache of concrete subclass joined mapping indexes. This allow concrete subclasses calls to be prepared and cached for inheritance queries.


isPrimaryKeyQuery

public boolean isPrimaryKeyQuery()
INTERNAL: Return if the query is known to be by primary key.


extendPessimisticLockScope

public void extendPessimisticLockScope()
INTERNAL: Extends pessimistic lock scope.


getBatchFetchPolicy

public BatchFetchPolicy getBatchFetchPolicy()
Return the batch fetch policy for configuring batch fetching.


setBatchFetchPolicy

public void setBatchFetchPolicy(BatchFetchPolicy batchFetchPolicy)
Set the batch fetch policy for configuring batch fetching.


getBatchReadAttributeExpressions

public java.util.List<Expression> getBatchReadAttributeExpressions()
INTERNAL: Return all attributes specified for batch reading.


setBatchReadAttributeExpressions

public void setBatchReadAttributeExpressions(java.util.List<Expression> attributeExpressions)
INTERNAL: Set all attributes specified for batch reading.


hasBatchReadAttributes

public boolean hasBatchReadAttributes()
INTERNAL: Return true is this query has batching


isAttributeBatchRead

public boolean isAttributeBatchRead(ClassDescriptor mappingDescriptor,
                                    java.lang.String attributeName)
INTERNAL: Return if the attribute is specified for batch reading.


computeBatchReadMappingQueries

public void computeBatchReadMappingQueries()
INTERNAL: Used to optimize joining by pre-computing the nested join queries for the mappings.


computeNestedQueriesForBatchReadExpressions

protected void computeNestedQueriesForBatchReadExpressions(java.util.List<Expression> batchReadExpressions)
INTERNAL: This method is used when computing the nested queries for batch read mappings. It recurses computing the nested mapping queries.


addBatchReadAttribute

public void addBatchReadAttribute(java.lang.String attributeName)
PUBLIC: Specify the foreign-reference mapped attribute to be optimized in this query. The query will execute normally, however when any of the batched parts is accessed, the parts will all be read in a single query, this allows all of the data required for the parts to be read in a single query instead of (n) queries. This should be used when the application knows that it requires the part for all of the objects being read. This can be used for one-to-one, one-to-many, many-to-many and direct collection mappings. The use of the expression allows for nested batch reading to be expressed.

Example: query.addBatchReadAttribute("phoneNumbers")

See Also:
addBatchReadAttribute(Expression), setBatchFetchType(BatchFetchType), addJoinedAttribute(String)

addBatchReadAttribute

public void addBatchReadAttribute(Expression attributeExpression)
PUBLIC: Specify the foreign-reference mapped attribute to be optimized in this query. The query will execute normally, however when any of the batched parts is accessed, the parts will all be read in a single query, this allows all of the data required for the parts to be read in a single query instead of (n) queries. This should be used when the application knows that it requires the part for all of the objects being read. This can be used for one-to-one, one-to-many, many-to-many and direct collection mappings. The use of the expression allows for nested batch reading to be expressed.

Example: query.addBatchReadAttribute(query.getExpressionBuilder().get("policies").get("claims"))

See Also:
setBatchFetchType(BatchFetchType), addJoinedAttribute(String)

setBatchFetchType

public void setBatchFetchType(BatchFetchType type)
PUBLIC: Set the batch fetch type for the query. This can be JOIN, EXISTS, or IN. This defines the type of batch reading to use with the query. The query must have defined batch read attributes to set its fetch type.

See Also:
addBatchReadAttribute(Expression)

setBatchFetchSize

public void setBatchFetchSize(int size)
PUBLIC: Set the batch fetch size for the query. This is only relevant for the IN batch fetch type. This defines the max number of keys for the IN clause.

See Also:
setBatchFetchType(BatchFetchType), addBatchReadAttribute(Expression)

getBatchObjects

public java.util.Map<java.lang.Object,java.lang.Object> getBatchObjects()
INTERNAL: Return temporary map of batched objects.

Overrides:
getBatchObjects in class DatabaseQuery

setBatchObjects

public void setBatchObjects(java.util.Map<java.lang.Object,java.lang.Object> batchObjects)
INTERNAL: Set temporary map of batched objects.

Overrides:
setBatchObjects in class DatabaseQuery

toString

public java.lang.String toString()
Overrides:
toString in class DatabaseQuery

EclipseLink 2.4.2, build 'v20130514-5956486' API Reference